China Professional Aluminum Tanker Trailer 36000L~42000L 3 Axle Transport Food Cooking Oil Edible Oil near me supplier

Product Description

 Aluminum Tanker Trailer 36000L~42000L 3 Axle Transport Food Cooking Oil
CONTACT US
 
Website:  tictrucks  
 Aluminum Tanker Trailer 36000L~42000L 3 Axle Transport Food Cooking Oil Edible Oil

Vegetable Oil 40CBM 45CBM Alloy Tanker Semirailer

 

  Aluminum Tank Trailer Aluminum Fuel Tanker Semi-trailer 3 axles, 36000L to 42000L

Tanker
Material                  Aluminium
Thickness of shell     7mm
Thickness of dish      7mm
Inside baffles            5mm
Compartments          5 to 7 compartments  
Volume                  36000L to 42000L+ 6% expansion  
Tank Top Accessories
Ladders fixed on the front and rear; foldable handrail
Walkway with anti-slip material in the front of reach the manholes,
Not covering the complete length of the tank.
Tank Equipments (all API Standard)
Each compartment is equipped with :
Aluminum Manhole cover 16″ or 20″      
Aluminum Emergency Bottom valve 3″ with Pneumatic switch in locker
Aluminum Spill Valve 3″ or 4″,  
Discharging Nylon hose 6m
Discharge and loading
Gravity discharge,
Top loading.            Option: Bottom loading
Running Gear
FUWA axle 13T*3                  Option: BPW axle 13T
Heavy duty spring suspension 18*16*9mm
12+1 pcs tires 315/80R22.5 Tire  (9.0*R22.5 steel rims)
3.5″ Jost kingpin                     Option: 2″
JOST 2-geared mechanical operated landing legs
Braking System
Double line air brakes Mechanical parking brake, CZPT brake valve
The first axle and the third axle with ABS System.
Electric Installation
Complete 24V system in explosion proof installation
Rear lighting with rear, stop, parking, direction, fog, reverse lights, side lights
Painting
Exterior surface treatment by shot blasting.
Painting by high solid primer directly on the surface
Painting inside special paint booth with the cargo cabin color or the color chosen by the customer
Accessories
Plastic Mudguards, Side protection, 2 Fire extinguisher, 1 Spare tire carrier.        
1 Tool box with standard tools,  Heavy duty tail bumper
  

 

Weight Rating(kgs) Curb Weight about 7,000kg
Payload about 39,100kg
Total Weight about 46,100kg
Dimension(mm) Trailer 11800mm*2500mm*3900mm( Exact size depends on the final design)
Wheel base 1310mm
Height of fifith wheel 1250mm
Front overhang 1300mm
Rear overhang 1400mm
Tanker Body Assembly
Shape Square Round
Total Volume(m³) 46m³+2%
Material Tank shell AL5183/6mm
Dish end AL5183/7mm
Baffle AL5183/5mm
Spoil box Standard
Manhole 20inch manhole
Manhole Cover 3 units of 500mm aluminium manhole cover
Bottom Valve 4″ pneumatic aluminium valve
Piping System 3 sets of 4″ aluminimum pipes under tank body
Discharging Valve 4″ aluminium ball valve
Main Beam Material:Q345 carbon steel
Height 500mm, Height 500mm,
Upper Thickness 14~18mm, Upper Thickness 14~18mm,
Middle Thickness 8~12mm, Middle Thickness 8~12mm,
Down Thickness 16~20mm Down Thickness 16~20mm
Landing Gear 28T 1 side Operation
King Pin One unit of 50# JOST standard bolt type king pin
Running Gear
Suspension Mechanical suspension or Air suspension
Axle 2 or 3 axles, BPW/FUWA brand(Optional)
Leaf Spring 90(W)mm×16(Thickness)mm×8(Layer)
Brake System WABCO Valve with big chamber
Lights Turning Light, Side Marker Light, Tail Light
Voltage 24V
Receptacle 7 ways (7 wire harness)
Painting Original aluminium
ABS Optional
Accessories One standard tool box, One anti-static tape,2 spare tire carrier, 2 units fire extinguisher
Shipping Terms By Bulk Cargo Carrier, RORO

Website:  tictrucks   
  

Certifications

Packaging & Shipping

 

Wholesale Aluminum Alloy Wheels Wholesale Aluminum Alloy Truck Wholesale Aluminum Oil Tank Wholesale Alloy Trailer Wholesale Aluminum Tank Trailers

Worm Gear Motors

Worm gear motors are often preferred for quieter operation because of the smooth sliding motion of the worm shaft. Unlike gear motors with teeth, which may click as the worm turns, worm gear motors can be installed in a quiet area. In this article, we will talk about the CZPT whirling process and the various types of worms available. We’ll also discuss the benefits of worm gear motors and worm wheel.
worm shaft

worm gear

In the case of a worm gear, the axial pitch of the ring pinion of the corresponding revolving worm is equal to the circular pitch of the mating revolving pinion of the worm gear. A worm with 1 start is known as a worm with a lead. This leads to a smaller worm wheel. Worms can work in tight spaces because of their small profile.
Generally, a worm gear has high efficiency, but there are a few disadvantages. Worm gears are not recommended for high-heat applications because of their high level of rubbing. A full-fluid lubricant film and the low wear level of the gear reduce friction and wear. Worm gears also have a lower wear rate than a standard gear. The worm shaft and worm gear is also more efficient than a standard gear.
The worm gear shaft is cradled within a self-aligning bearing block that is attached to the gearbox casing. The eccentric housing has radial bearings on both ends, enabling it to engage with the worm gear wheel. The drive is transferred to the worm gear shaft through bevel gears 13A, 1 fixed at the ends of the worm gear shaft and the other in the center of the cross-shaft.

worm wheel

In a worm gearbox, the pinion or worm gear is centered between a geared cylinder and a worm shaft. The worm gear shaft is supported at either end by a radial thrust bearing. A gearbox’s cross-shaft is fixed to a suitable drive means and pivotally attached to the worm wheel. The input drive is transferred to the worm gear shaft 10 through bevel gears 13A, 1 of which is fixed to the end of the worm gear shaft and the other at the centre of the cross-shaft.
Worms and worm wheels are available in several materials. The worm wheel is made of bronze alloy, aluminum, or steel. Aluminum bronze worm wheels are a good choice for high-speed applications. Cast iron worm wheels are cheap and suitable for light loads. MC nylon worm wheels are highly wear-resistant and machinable. Aluminum bronze worm wheels are available and are good for applications with severe wear conditions.
When designing a worm wheel, it is vital to determine the correct lubricant for the worm shaft and a corresponding worm wheel. A suitable lubricant should have a kinematic viscosity of 300 mm2/s and be used for worm wheel sleeve bearings. The worm wheel and worm shaft should be properly lubricated to ensure their longevity.

Multi-start worms

A multi-start worm gear screw jack combines the benefits of multiple starts with linear output speeds. The multi-start worm shaft reduces the effects of single start worms and large ratio gears. Both types of worm gears have a reversible worm that can be reversed or stopped by hand, depending on the application. The worm gear’s self-locking ability depends on the lead angle, pressure angle, and friction coefficient.
A single-start worm has a single thread running the length of its shaft. The worm advances 1 tooth per revolution. A multi-start worm has multiple threads in each of its threads. The gear reduction on a multi-start worm is equal to the number of teeth on the gear minus the number of starts on the worm shaft. In general, a multi-start worm has 2 or 3 threads.
Worm gears can be quieter than other types of gears because the worm shaft glides rather than clicking. This makes them an excellent choice for applications where noise is a concern. Worm gears can be made of softer material, making them more noise-tolerant. In addition, they can withstand shock loads. Compared to gears with toothed teeth, worm gears have a lower noise and vibration rate.
worm shaft

CZPT whirling process

The CZPT whirling process for worm shafts raises the bar for precision gear machining in small to medium production volumes. The CZPT whirling process reduces thread rolling, increases worm quality, and offers reduced cycle times. The CZPT LWN-90 whirling machine features a steel bed, programmable force tailstock, and five-axis interpolation for increased accuracy and quality.
Its 4,000-rpm, 5-kW whirling spindle produces worms and various types of screws. Its outer diameters are up to 2.5 inches, while its length is up to 20 inches. Its dry-cutting process uses a vortex tube to deliver chilled compressed air to the cutting point. Oil is also added to the mixture. The worm shafts produced are free of undercuts, reducing the amount of machining required.
Induction hardening is a process that takes advantage of the whirling process. The induction hardening process utilizes alternating current (AC) to cause eddy currents in metallic objects. The higher the frequency, the higher the surface temperature. The electrical frequency is monitored through sensors to prevent overheating. Induction heating is programmable so that only certain parts of the worm shaft will harden.

Common tangent at an arbitrary point on both surfaces of the worm wheel

A worm gear consists of 2 helical segments with a helix angle equal to 90 degrees. This shape allows the worm to rotate with more than 1 tooth per rotation. A worm’s helix angle is usually close to 90 degrees and the body length is fairly long in the axial direction. A worm gear with a lead angle g has similar properties as a screw gear with a helix angle of 90 degrees.
The axial cross section of a worm gear is not conventionally trapezoidal. Instead, the linear part of the oblique side is replaced by cycloid curves. These curves have a common tangent near the pitch line. The worm wheel is then formed by gear cutting, resulting in a gear with 2 meshing surfaces. This worm gear can rotate at high speeds and still operate quietly.
A worm wheel with a cycloid pitch is a more efficient worm gear. It reduces friction between the worm and the gear, resulting in greater durability, improved operating efficiency, and reduced noise. This pitch line also helps the worm wheel engage more evenly and smoothly. Moreover, it prevents interference with their appearance. It also makes worm wheel and gear engagement smoother.
worm shaft

Calculation of worm shaft deflection

There are several methods for calculating worm shaft deflection, and each method has its own set of disadvantages. These commonly used methods provide good approximations but are inadequate for determining the actual worm shaft deflection. For example, these methods do not account for the geometric modifications to the worm, such as its helical winding of teeth. Furthermore, they overestimate the stiffening effect of the gearing. Hence, efficient thin worm shaft designs require other approaches.
Fortunately, several methods exist to determine the maximum worm shaft deflection. These methods use the finite element method, and include boundary conditions and parameter calculations. Here, we look at a couple of methods. The first method, DIN 3996, calculates the maximum worm shaft deflection based on the test results, while the second one, AGMA 6022, uses the root diameter of the worm as the equivalent bending diameter.
The second method focuses on the basic parameters of worm gearing. We’ll take a closer look at each. We’ll examine worm gearing teeth and the geometric factors that influence them. Commonly, the range of worm gearing teeth is 1 to four, but it can be as large as twelve. Choosing the teeth should depend on optimization requirements, including efficiency and weight. For example, if a worm gearing needs to be smaller than the previous model, then a small number of teeth will suffice.

China Professional Aluminum Tanker Trailer 36000L~42000L 3 Axle Transport Food Cooking Oil Edible Oil   near me supplier China Professional Aluminum Tanker Trailer 36000L~42000L 3 Axle Transport Food Cooking Oil Edible Oil   near me supplier