Product Description
Four-channel safety valve | WG900036 0571 |
ECAS solenoid valve | WG900036571 |
Pressure reducing valve (1.0 to | WG9000360549 |
Brake Signal Transmitter (EBS3) | WG900036 0571 |
EBS3 front axle module | WG900036571 |
EBS3 trailer control valve | WG900036571 |
EBS3 Rear Axle module | WG900036571 |
Air drying unit (1.0 MPa with control | WG900036571 |
Handbrake valve | WG900036571 |
Trailer manual brake valve | WG900036571 |
Diaphragm spring brake chamber L=70 | WG900036 0571 |
Diaphragm spring brake air chamber | WG900036 0571 |
Auxiliary Gas Distribution Module | WG9000361404 |
Auxiliary Gas Distribution Module | WG9000361414 |
Strong clamp | WG |
Strong clamp | WG |
Tapered Roller Bearing | WG9100032311 |
Tapered Roller Bearing | WG9100032314 |
Front disc brake Air chamber (22″) | WG9100364122 |
Wheel stud | WG91571714 |
Wheel bolt | WG910571212 |
Kingpin limiting screw | WG91571006 |
Brake pad assembly | WG9100443050 |
Brake pad assembly | WG9100444150 |
Rubber Bearing | WG9100680067 |
New main power switch | WG9100765712 |
Wheel Stud Protective Cap (Ginkgo | WG9112610085 |
ABS sensor (WABCO) | WG916571522 |
ABS sensor bushing (WABCO) | WG916571523 |
Riveted connection | WG9231340068 |
ABS gear ring | WG923134 0571 |
Fuel tank drawstring | WG9326550035 |
70178 Universal joint Assembly | WG93757171 |
Connecting Drive shaft | WG937571571 |
Wheel nut | WG952541571 |
Battery container cover | WG952576571 |
WG9618713101 | |
Fuel pump | WG9715115571 |
NanoBCU controller | WG9716582011 |
C7 Fuel combination device | WG9716582244 |
Electrical junction box assembly | WG9716582301 |
5A chip fuse | WG9716582301+002 |
/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Where can I buy axle seals for preventing fluid leaks in my vehicle’s axles?
When it comes to purchasing axle seals to prevent fluid leaks in your vehicle’s axles, there are several options available. Here are some places where you can buy axle seals:
1. Automotive Parts Stores:
Visit local automotive parts stores such as AutoZone, Advance Auto Parts, O’Reilly Auto Parts, or NAPA Auto Parts. These stores typically have a wide range of automotive seals, including axle seals, in stock. You can either visit the physical store or check their online catalogs to find the specific axle seal you need for your vehicle.
2. Dealerships:
If you prefer to purchase genuine OEM (Original Equipment Manufacturer) axle seals, consider visiting a dealership authorized by your vehicle’s manufacturer. Dealerships often carry original parts that are specifically designed for your vehicle make and model. Contact your local dealership’s parts department to inquire about the availability of axle seals for your vehicle.
3. Online Retailers:
Online retailers like Amazon, eBay, and RockAuto offer a wide range of automotive parts, including axle seals. These platforms provide the convenience of browsing and purchasing axle seals from the comfort of your home. Make sure to check the product details, specifications, and customer reviews before making a purchase.
4. Local Mechanics and Repair Shops:
Local mechanics and repair shops often have access to a variety of automotive seals, including axle seals. They can source and install the appropriate seals for your vehicle during maintenance or repair services. Reach out to trusted local mechanics or repair shops in your area and inquire about their availability and pricing for axle seals.
5. Manufacturer’s Online Stores:
Some vehicle manufacturers have their own online stores where you can purchase genuine OEM parts, including axle seals. Visit the official website of your vehicle’s manufacturer and look for their online parts store. You can search for the specific axle seal needed for your vehicle using your vehicle identification number (VIN) or the model details.
6. Salvage Yards:
If you are looking for cost-effective options or rare axle seals, salvage yards can be an option. Salvage yards specialize in selling used parts salvaged from vehicles. However, when purchasing from salvage yards, it’s important to carefully inspect the condition and compatibility of the axle seals to ensure they are suitable for your vehicle.
When purchasing axle seals, make sure to provide accurate information about your vehicle’s make, model, and year to ensure you get the correct seals that fit your vehicle’s axle specifications. Additionally, consider factors such as the quality of the seals, warranty options, and return policies when making your purchase decision.
Remember, if you are unsure about the specific axle seals required for your vehicle or need assistance with installation, it is recommended to consult with a qualified mechanic or technician who can guide you in selecting the right seals and ensure proper installation to prevent fluid leaks in your vehicle’s axles.
Are there specific maintenance tips to extend the lifespan of my vehicle’s axles?
Maintaining the axles of your vehicle is crucial for ensuring their longevity, performance, and overall safety. Here are some specific maintenance tips to extend the lifespan of your vehicle’s axles:
- Regular Inspection:
- Lubrication:
- Seal Inspection and Replacement:
- Proper Loading and Towing:
- Driving Techniques:
- Regular Wheel Alignment:
- Proper Tire Inflation:
- Service Intervals:
Perform regular visual inspections of the axles to check for any signs of damage, leaks, or excessive wear. Look for cracks, bends, or rust on the axle housing, and inspect the axle shafts, seals, and boots. Early detection of issues can help prevent further damage and costly repairs.
Follow the manufacturer’s recommendations for axle lubrication. Proper lubrication helps reduce friction and wear on the axle components. Regularly check the axle’s lubricant level and quality, and replace it as necessary. Use the recommended lubricant type and viscosity for your specific axle.
Check the axle seals for any signs of leaks, such as fluid accumulation around the axle ends. Leaking seals can allow contaminants to enter the axle assembly, leading to premature wear and damage. Replace worn or damaged seals promptly to maintain proper lubrication and prevent contamination.
Ensure that you do not exceed the weight capacity of your vehicle’s axles. Overloading or towing beyond the recommended limits can put excessive stress on the axles, leading to premature wear or failure. Be mindful of the payload and towing capacity specified by the vehicle manufacturer.
Adopt proper driving techniques to minimize stress on the axles. Avoid sudden acceleration, aggressive cornering, and harsh braking, as these actions can subject the axles to excessive forces. Additionally, be cautious when driving over rough terrain or obstacles to prevent impacts that could damage the axles.
Maintain proper wheel alignment to prevent excessive strain on the axles. Misaligned wheels can put uneven loads on the axles, leading to accelerated wear. Regularly check and adjust the wheel alignment as per the manufacturer’s recommendations.
Ensure that your vehicle’s tires are properly inflated according to the recommended tire pressure. Underinflated or overinflated tires can affect the load distribution on the axles and increase the risk of axle damage. Regularly check and maintain the correct tire pressure.
Follow the recommended service intervals for your vehicle, which may include axle inspections, lubricant changes, and other maintenance tasks. Adhering to these intervals ensures that the axles are properly maintained and any potential issues are addressed in a timely manner.
It’s important to consult your vehicle’s owner’s manual for specific maintenance guidelines and intervals provided by the manufacturer. Additionally, if you notice any unusual noises, vibrations, or handling issues related to the axles, it is advisable to have your vehicle inspected by a qualified mechanic to identify and address any potential axle problems promptly.
How do solid axles differ from independent axles in terms of performance?
When comparing solid axles and independent axles in terms of performance, there are several key differences to consider. Both types of axles have their advantages and disadvantages, and their suitability depends on the specific application and desired performance characteristics. Here’s a comparison of solid axles and independent axles:
Aspect | Solid Axles | Independent Axles |
---|---|---|
Load-Bearing Capability | Solid axles have high load-bearing capability due to their robust and sturdy construction. They can handle heavy loads and provide excellent stability, making them suitable for off-road vehicles, heavy-duty trucks, and towing applications. | Independent axles typically have lower load-bearing capability compared to solid axles. They are designed for lighter loads and offer improved ride comfort and handling characteristics. They are commonly used in passenger cars, sports cars, and vehicles with a focus on maneuverability and road performance. |
Wheel Articulation | Solid axles have limited wheel articulation due to their connected and rigid design. This can result in reduced traction and compromised wheel contact with the ground on uneven terrain. However, solid axles provide excellent traction in situations where the weight distribution on all wheels needs to be maintained, such as in off-road or rock-crawling applications. | Independent axles offer greater wheel articulation as each wheel can move independently of the others. This allows the wheels to better conform to uneven terrain, maximizing traction and maintaining contact with the ground. Independent axles provide improved off-road capability, enhanced handling, and better ride comfort. |
Ride Comfort | Due to their rigid design, solid axles generally provide a stiffer and less compliant ride compared to independent axles. They transmit more road shocks and vibrations to the vehicle’s occupants, resulting in a rougher ride quality. | Independent axles are known for providing better ride comfort. Each wheel can react independently to road imperfections, absorbing shocks and vibrations more effectively. This leads to a smoother and more comfortable ride, particularly on paved roads and surfaces with minor irregularities. |
Handling and Stability | Solid axles offer excellent stability due to their connected nature. They provide better resistance to lateral forces, making them suitable for high-speed stability and towing applications. However, the rigid axle design can limit overall handling and maneuverability, particularly in tight corners or during quick direction changes. | Independent axles generally offer improved handling and maneuverability. Each wheel can react independently to steering inputs, allowing for better cornering performance and agility. Independent axles are commonly found in vehicles where precise handling and responsive steering are desired, such as sports cars and performance-oriented vehicles. |
Maintenance and Repair | Solid axles are relatively simpler in design and have fewer moving parts, making them easier to maintain and repair. They are often more resistant to damage and require less frequent servicing. However, if a component within the axle assembly fails, the entire axle may need to be replaced. | Independent axles are typically more complex in design and have multiple moving parts, such as control arms, CV joints, or bearings. This complexity can result in higher maintenance and repair costs. However, if a failure occurs, only the affected component needs to be replaced, reducing repair expenses compared to replacing the entire axle. |
It’s important to note that advancements in suspension and axle technologies have resulted in various hybrid systems that combine features of solid and independent axles. These systems aim to provide a balance between load-bearing capability, wheel articulation, ride comfort, and handling performance based on specific application requirements.
In summary, solid axles excel in load-bearing capability, stability, and durability, making them suitable for heavy-duty applications and off-road conditions. Independent axles offer improved ride comfort, better wheel articulation, enhanced handling, and maneuverability, making them suitable for passenger cars and vehicles focused on road performance. The choice between solid axles and independent axles depends on the specific needs and priorities of the vehicle or machinery.
editor by lmc 2024-11-06
China factory Truck Trailer Axle CZPT BPW Axle axle cost
Product Description
Axle features:
- pecial heat-treat alloy steel axle beam, it has the virtues of good synthetic performance, strong load ability and lower self weight.
- Wholly heat treatment for high quality alloy forged solid spindle, providing superior fatigue capability.
- High performance asbestos free brake linings extend service life.
- Camshaft matching with special seals, can ensure no entry of the grease into the brake drum thus axle will be more safety.
- Mobil grease lengthens maintenance-free time.
- Bearing is the domestic top brand, with the advantages of over loading capability, high rotating speed,good intensity, abrade resistant and heat resistant.
- Wheel nut is made of alloy steel with high strength, good tensile and bending resistance,not easy to break.
- Key components of axle are processed by digital equipment, complied with the international standard. Special requirements can also be meet as per client’s request.
Axle – Germany Series
Model |
Capacity | Brake | Track | Distance of Spring | Distance of Brake Chamber | Axle tube | Wheel Fixing | Bearing | Total Length | Weight | Recommend wheel | ||
T | mm | mm | mm | mm | mm | Stud | P.C.D. | C.B.D. | mm | kg | |||
UTG12SB03B2 | 12 | 420×180 | 1840 | ≥940 | 440 | 150 | 10-M22x1.5 ISO |
335 | 281 | 33213/ 33118 |
2172 | 370 | 8.00-20 |
UTG12SB03B3 | 12 | 420×200 | 1840 | ≥940 | 375 | 150 | 10-M22x1.5 ISO |
335 | 281 | 33213/ 33118 |
2172 | 397 | 8.00-20 |
UTG12SB19B2 | 12 | 420×180 | 1870 | ≥980 | 395 | 150 | 6-M20x1.5 | – | – | 33213/ 33118 |
2155 | 430 | 8.0-20 |
UTG12SB19B3 | 12 | 420×200 | 1870 | ≥980 | 395 | 150 | 6-M20x1.5 | – | – | 33213/ 33118 |
2155 | 450 | 8.5-20 |
UTG14SB03B2 | 14 | 420×180 | 1840 | ≥950 | 380 | 150 | 10-M22x1.5 ISO |
335 | 281 | 33215/ 32219 |
2222 | 400 | 8.00-20 |
UTG14SB03B3 | 14 | 420×200 | 1840 | ≥950 | 360 | 150 | 10-M22x1.5 ISO |
335 | 281 | 33215/ 32219 |
2222 | 417 | 8.00-20 |
UTG14SB19B3 | 14 | 420×200 | 1870 | ≥900 | 250 | 150 | 6-M20x1.5 | – | – | 33215/ 32219 |
2192 | 462 | 8.5-20 |
UTG16SB03B2 | 16 | 420×180 | 1850 | ≥950 | 390 | 150 | 10-M22x1.5 ISO |
335 | 281 | 32314/ 32222 |
2293 | 450 | 8.5-20 |
UTG16SB03B3 | 16 | 420×200 | 1850 | ≥950 | 390 | 150 | 10-M22x1.5 ISO |
335 | 281 | 32314/ 32222 |
2293 | 459 | 8.5-20 |
UTG16SB03B4 | 16 | 420×220 | 1850 | ≥950 | 390 | 150 | 10-M22x1.5 ISO |
335 | 281 | 32314/ 32222 |
2293 | 465 | 8.5-20 |
UTG16SB19B3 | 16 | 420×200 | 1870 | ≥900 | 253 | 150 | 6-M20x1.5 | – | – | 32314/ 32222 |
2260 | 566 | 8.5-24 |
/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
What are the safety considerations when working with axles, especially during repairs?
Working with axles, especially during repairs, requires careful attention to safety to prevent accidents and injuries. Here are some important safety considerations to keep in mind when working with axles:
1. Personal Protective Equipment (PPE):
Wear appropriate personal protective equipment, including safety goggles, gloves, and steel-toed boots. PPE helps protect against potential hazards such as flying debris, sharp edges, and accidental contact with heavy components.
2. Vehicle Stability:
Ensure that the vehicle is on a stable and level surface before working on the axles. Engage the parking brake and use wheel chocks to prevent unintended vehicle movement. The stability of the vehicle is crucial to maintain a safe working environment.
3. Lifting and Support:
Use proper lifting equipment, such as hydraulic jacks or vehicle lifts, to raise the vehicle safely. Follow the manufacturer’s guidelines for lifting points and weight capacities. Once the vehicle is lifted, support it securely with jack stands or other appropriate supports to prevent it from falling or shifting during repairs.
4. Lockout/Tagout:
If the repair work involves disconnecting or removing any electrical or mechanical components that could cause the axle or wheels to move, follow lockout/tagout procedures. This involves locking and tagging out the power source, so it cannot be accidentally energized while work is being performed.
5. Proper Tools and Equipment:
Use the correct tools and equipment for the job. Using improper tools or makeshift methods can lead to accidents and damage to the axle or surrounding components. Follow the manufacturer’s instructions and recommended procedures for disassembling, repairing, and reassembling the axle.
6. Proper Torque and Tightening:
When reassembling the axle components, use a torque wrench to ensure that fasteners are tightened to the manufacturer’s specifications. Over-tightening or under-tightening can lead to component failure or damage. Follow the recommended torque values provided by the vehicle manufacturer.
7. Safe Handling of Heavy Components:
Axle components can be heavy and cumbersome. Use appropriate lifting techniques and equipment, such as hoists or lifting straps, to safely handle heavy axle parts. Avoid lifting heavy components alone whenever possible and ask for assistance when needed.
8. Proper Disposal of Fluids and Waste:
If the repair involves draining fluids from the axle, such as differential oil, ensure proper disposal according to local regulations. Use appropriate containers to collect and store fluids and dispose of them at authorized collection points.
9. Training and Experience:
Working with axles requires knowledge and experience. If you are unfamiliar with axle repairs, consider seeking assistance from a qualified mechanic or technician who has the necessary training and expertise. If you decide to perform the repairs yourself, ensure that you have the appropriate knowledge and skills to carry out the task safely.
By following these safety considerations, you can help minimize the risk of accidents, injuries, and damage when working with axles, ensuring a safe working environment for yourself and others involved in the repair process.
Where can I purchase high-quality replacement axles for my make and model of vehicle?
When it comes to purchasing high-quality replacement axles for your specific make and model of vehicle, there are several reliable sources you can consider. Here are some options:
- Authorized Dealerships:
- Independent Auto Parts Stores:
- Online Retailers:
- Specialty Performance Retailers:
- Local Salvage Yards:
- Vehicle Manufacturer’s Online Parts Store:
Authorized dealerships of your vehicle’s manufacturer are a trustworthy option for purchasing replacement axles. They offer genuine parts that are specifically designed and engineered for your make and model. Contact your local dealership’s parts department to inquire about the availability of replacement axles.
Independent auto parts stores often carry a wide range of replacement axles from reputable manufacturers. These stores typically have knowledgeable staff who can help you identify the correct axle for your vehicle. Examples of popular auto parts stores include AutoZone, Advance Auto Parts, and O’Reilly Auto Parts.
Online retailers provide a convenient way to browse and purchase replacement axles from the comfort of your home. Websites such as Amazon, eBay, and RockAuto offer extensive selections of axles for various vehicle makes and models. Be sure to verify the compatibility of the axles with your specific vehicle before making a purchase.
If you are looking for high-performance or upgraded axles, specialty performance retailers may be the way to go. These retailers cater to enthusiasts and offer axles that are designed to handle increased power, torque, or off-road demands. Examples of specialty performance retailers include Summit Racing, Jegs, and 4 Wheel Parts.
Salvage yards, also known as junkyards or auto recyclers, can be a cost-effective option for finding used axles in good condition. Some salvage yards have an inventory system that allows you to search for specific parts based on your vehicle’s make and model. It’s important to thoroughly inspect used axles before purchase to ensure they meet your requirements.
Many vehicle manufacturers have their own online parts stores where you can directly purchase genuine replacement parts, including axles. These online stores provide the assurance of authenticity and compatibility with your specific make and model. Visit the official website of your vehicle’s manufacturer and look for their parts store section.
When purchasing replacement axles, it’s important to prioritize quality and ensure that the parts meet or exceed the original equipment specifications. Consider factors such as warranty coverage, customer reviews, and the reputation of the manufacturer or retailer. Additionally, consult with knowledgeable professionals or refer to your vehicle’s owner’s manual for specific axle specifications and recommendations.
How do solid axles differ from independent axles in terms of performance?
When comparing solid axles and independent axles in terms of performance, there are several key differences to consider. Both types of axles have their advantages and disadvantages, and their suitability depends on the specific application and desired performance characteristics. Here’s a comparison of solid axles and independent axles:
Aspect | Solid Axles | Independent Axles |
---|---|---|
Load-Bearing Capability | Solid axles have high load-bearing capability due to their robust and sturdy construction. They can handle heavy loads and provide excellent stability, making them suitable for off-road vehicles, heavy-duty trucks, and towing applications. | Independent axles typically have lower load-bearing capability compared to solid axles. They are designed for lighter loads and offer improved ride comfort and handling characteristics. They are commonly used in passenger cars, sports cars, and vehicles with a focus on maneuverability and road performance. |
Wheel Articulation | Solid axles have limited wheel articulation due to their connected and rigid design. This can result in reduced traction and compromised wheel contact with the ground on uneven terrain. However, solid axles provide excellent traction in situations where the weight distribution on all wheels needs to be maintained, such as in off-road or rock-crawling applications. | Independent axles offer greater wheel articulation as each wheel can move independently of the others. This allows the wheels to better conform to uneven terrain, maximizing traction and maintaining contact with the ground. Independent axles provide improved off-road capability, enhanced handling, and better ride comfort. |
Ride Comfort | Due to their rigid design, solid axles generally provide a stiffer and less compliant ride compared to independent axles. They transmit more road shocks and vibrations to the vehicle’s occupants, resulting in a rougher ride quality. | Independent axles are known for providing better ride comfort. Each wheel can react independently to road imperfections, absorbing shocks and vibrations more effectively. This leads to a smoother and more comfortable ride, particularly on paved roads and surfaces with minor irregularities. |
Handling and Stability | Solid axles offer excellent stability due to their connected nature. They provide better resistance to lateral forces, making them suitable for high-speed stability and towing applications. However, the rigid axle design can limit overall handling and maneuverability, particularly in tight corners or during quick direction changes. | Independent axles generally offer improved handling and maneuverability. Each wheel can react independently to steering inputs, allowing for better cornering performance and agility. Independent axles are commonly found in vehicles where precise handling and responsive steering are desired, such as sports cars and performance-oriented vehicles. |
Maintenance and Repair | Solid axles are relatively simpler in design and have fewer moving parts, making them easier to maintain and repair. They are often more resistant to damage and require less frequent servicing. However, if a component within the axle assembly fails, the entire axle may need to be replaced. | Independent axles are typically more complex in design and have multiple moving parts, such as control arms, CV joints, or bearings. This complexity can result in higher maintenance and repair costs. However, if a failure occurs, only the affected component needs to be replaced, reducing repair expenses compared to replacing the entire axle. |
It’s important to note that advancements in suspension and axle technologies have resulted in various hybrid systems that combine features of solid and independent axles. These systems aim to provide a balance between load-bearing capability, wheel articulation, ride comfort, and handling performance based on specific application requirements.
In summary, solid axles excel in load-bearing capability, stability, and durability, making them suitable for heavy-duty applications and off-road conditions. Independent axles offer improved ride comfort, better wheel articulation, enhanced handling, and maneuverability, making them suitable for passenger cars and vehicles focused on road performance. The choice between solid axles and independent axles depends on the specific needs and priorities of the vehicle or machinery.
editor by lmc 2024-11-06
China Hot selling Wholesale Prices in Factories Are Cheap, with Good Quality and Strong Load-Bearing Capacity Farm Trailer Axles boat trailer axle
Product Description
Product Description
Darong (ZheJiang ) International Trade Co., Ltd. provides all kinds of agricultural axles and short axles for tractors, small trailers, agricultural trailers, ship trailers, etc.
1) Full axles&stub axles for agricultural equipment.
2) Track length can be met as per your request.
3) With or without brake is optional.
4) Capacity options: From 1T to 8T.
5) Axle Beam: from 40mm to 80mm, Round or Square is optional.
6) Finish: Black Painting, Galvanized.
7) Axle Factory Certificate: ISO/TS16949.
Model | Max. Capacity (T) |
Wheel Track ( mm) |
Air chamber spacing ( mm) |
Axle Tube ( mm) |
Brake ( mm) |
Studs ( mm) |
P. C. D ( mm) |
Hole Diameter ( mm) |
DRT08 | 8 | 1840 | 365 | 127 | 410*150 | 8xM20x1.5 ISO | 275 | 220 |
Noted:
1. The Trailer Axle track can be customized according to customer requirements
2. Axles can install ABS brake.
3. Axles can install Air bra
Detailed Photos
Importance of accessories and shafts
In our daily lives, whether it is work or entertainment, all kinds of equipment cannot do without high-quality accessories and shafts. The performance of a device depends not only on the quality of its main components, but also on those seemingly insignificant but actually crucial accessories and shafts. Here, we will delve into the importance of accessories and shafts and how they affect the overall performance of a device.
First of all, the quality of accessories directly affects the operation efficiency and stability of the equipment. Every accessory in the equipment has its unique function, and they work together to complete the work of the equipment. Therefore, any failure of any accessory may lead to the failure of the entire equipment. We use high-quality accessories of well-known brands at home and abroad to ensure the stable operation of the equipment. These accessories are in line with global standards, have strong practicability, low price, and easy maintenance.
Secondly, the shaft is the key part that transmits force and motion in the equipment. The quality of the shaft directly affects the transmission efficiency and precision of the equipment. Our factory produces its own shaft tube, which has quality assurance and cost advantage. During the assembly process, we strictly control the precision of the shaft to ensure the transmission efficiency and precision.
In general, although the accessories and shafts are not the most eye-catching parts of the equipment, their functions are not negligible. We will continue to be committed to providing high-quality accessories and shafts to ensure the best performance of the equipment.
Company Profile
- ZheJiang Yixin Axle Manufacturing Co., Ltd. is located in Guoyuan Road, Industrial Park,Quanpu Town,Xihu (West Lake) Dis. County,ZheJiang Province.Founded in 2008, the company is based on the special vehicle industry, axle, special axle, suspension, air suspension and ancillary products. With excellent quality and service, the company has won a good reputation, and set up a technical center, engineering laboratory, industrial design center. The company has developed into a high-end axle, special vehicle suspension and axle research and development, production, sales as 1 of the group company, with a total area of more than 160 acres, total assets of 400 million yuan, with an annual output of more than 60000 roots.
- Yixin axle company is constantly committed to quality improvement, adhere to the business philosophy of “lean manufacturing, thoughtful service, CZPT and trustworthy, mutual benefit and win-win,” vigorously promote the spirit of craftsmanship, and create a high-end brand of domestic special purpose vehicle auto parts.
Our Advantages
We are proud to possess the state-of-the-art production equipment and cutting-edge technology, which serve as a solid foundation for ensuring the exceptional quality of trailer axles. Our company has a highly mature and refined axle manufacturing process that is meticulously designed to meet the diverse and specific needs of our customers. Each axle undergoes a series of more than 10 intricate processes, involving precision engineering, careful assembly, and rigorous quality control at every stage. Finally, our comprehensive quality inspection procedure for axles is implemented with utmost care and attention to detail. This rigorous inspection ensures that every single axle that leaves our production facility is a truly qualified product, meeting the highest industry standards and providing reliable performance for our customers.
Office photo
The company is equipped with the most advanced office equipment and technology, including high-speed and stable networks, high-definition displays, and multifunctional printers, providing strong support for employees’ work. At the same time, the company also has professional conference rooms and training rooms equipped with advanced audio-visual equipment, providing an ideal place for various business meetings and employee training.
In the rest area, there are comfortable sofas, green plants, and vending machines, providing employees with a space to relax. The company also has a special tea room that provides various beverages and snacks, allowing employees to replenish energy at any time during busy work.
Judging from the overall environment of the company, it can be seen that the company is very powerful. It has a high-quality and professional team who play outstanding roles in their respective fields. The company focuses on talent cultivation and development and provides employees with broad development space and good welfare benefits. At the same time, the company has a good reputation and extensive customer resources in the industry, constantly exploring and innovating and leading the development of the industry.
Packaging & Shipping
Certifications
1. Who are we? We stand proudly on the vibrant land of ZheJiang , China. In 2001, with perseverance and enthusiasm for trailer axle manufacturing, we were officially established. Over the years, we have always been focused on the research, development and manufacturing of trailer axles, constantly exploring and innovating and striving for excellence. At present, the main products of our group are diverse, including various types of axles such as disc axles, drum axles, low flatbed axles, three-line six-axis axles, concave axles, eccentric axles, small-tonnage trailer axles and semi-trailer axles, as well as various types of suspensions, leaf springs, overhanging beams and drawbars. Our products, with their excellent quality and performance, have won wide acclaim from customers around the world. Our cooperative customers are spread across more than 50 countries and regions in Asia, Europe, Latin America, the Middle East, Australia and Africa. We have joined hands with many customers to create a glorious chapter and bring them higher benefits and values.
2. How do we ensure quality? Quality is our lifeline, and our pursuit of product quality never stops. Our products have passed the ISO9001 international quality standard certification, which is a high recognition of our product quality. In order to ensure that each product reaches the highest quality standard, we implement all-round quality assurance measures. From the strict selection of raw materials to the application of advanced production processes and then to the strict quality inspection links, we do not let go of any details. Through these comprehensive and rigorous measures, our products fully meet the requirements of finished product extreme performance tests and fully guarantee product quality, so that customers can use our products with confidence.
3. What can you buy from us? We provide you with a rich variety of high-quality products. Whether it is a sturdy and durable trailer axle, or a trailer mechanical suspension, trailer part air suspension, bracket part suspension and semi-trailer parts with excellent performance, we can meet your needs. Our customers are all over the world. This is due to our always adhering to the customer-centered concept and constantly improving product quality and service level. So far, we have maintained an excellent record of zero quality disputes, which is the best proof of our product quality.
4. Do you have a minimum order quantity? We fully understand the different needs of customers, so the minimum order quantity can be negotiated according to specific circumstances. We believe that cooperation is based on mutual understanding and CZPT results. The larger the quantity, the more competitive the unit price. We will provide you with the most favorable price to let you obtain the greatest economic benefits. If you have a purchase intention, welcome to contact us at any time and we will serve you wholeheartedly.
5. Can you provide us with the product specifications? Of course. Please consult our online customer service staff. They will serve you with a professional and enthusiastic attitude. They will send you our product catalog in time. The product catalog details various product models and their specification parameters. You can choose the corresponding product model from our product catalog according to your own needs. In addition, you can scan the QR code on our page to watch the VR video of our factory and intuitively understand our advanced production equipment, strict production processes and professional production team. Let you have a deeper understanding of our company and products before purchasing products.
Send your information to this supplier and start our cooperation journey to create a better future together.
FAQ
Q1. What is your terms of packing?
A: Generally, we will package it with fumigation-free wooden holder in brown boxes. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We’ll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: FOB, CIF, DDU, EXW, DAP.
Q4. How about your delivery time?
A: Generally, it will take 5 to 10 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.
/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
What is the role of axles in electric vehicles, and how do they differ from traditional axles?
Electric vehicles (EVs) have unique requirements when it comes to their drivetrain systems, including the axles. The role of axles in EVs is similar to traditional vehicles, but there are some key differences. Here’s a detailed explanation of the role of axles in electric vehicles and how they differ from traditional axles:
Role of Axles in Electric Vehicles:
The primary role of axles in electric vehicles is to transmit torque from the electric motor(s) to the wheels, enabling vehicle propulsion. The axles connect the motor(s) to the wheels and provide support for the weight of the vehicle. Axles are responsible for transferring the rotational force generated by the electric motor(s) to the wheels, allowing the vehicle to move forward or backward.
In electric vehicles, the axles are an integral part of the drivetrain system, which typically includes an electric motor(s), power electronics, and a battery pack. The axles play a crucial role in ensuring efficient power transfer and delivering the desired performance and handling characteristics of the vehicle.
Differences from Traditional Axles:
While the fundamental role of axles in electric vehicles is the same as in traditional vehicles, there are some notable differences due to the unique characteristics of electric propulsion systems:
1. Integration with Electric Motors: In electric vehicles, the axles are often integrated with the electric motors. This means that the motor(s) and axle assembly are combined into a single unit, commonly referred to as an “electric axle” or “e-axle.” This integration helps reduce the overall size and weight of the drivetrain system and simplifies installation in the vehicle.
2. High Torque Requirements: Electric motors generate high amounts of torque from the moment they start, providing instant acceleration. As a result, axles in electric vehicles need to handle higher torque loads compared to traditional axles. They are designed to withstand the torque output of the electric motor(s) and efficiently transmit it to the wheels.
3. Regenerative Braking: Electric vehicles often utilize regenerative braking, which converts the vehicle’s kinetic energy into electrical energy and stores it in the battery. The axles in electric vehicles may incorporate systems or components that enable regenerative braking, such as sensors, controllers, and electric brake actuators.
4. Space Optimization: Electric vehicles often have different packaging requirements compared to traditional internal combustion engine vehicles. The axles in electric vehicles are designed to accommodate the space constraints and specific layout of the vehicle, considering the placement of the battery pack, electric motor(s), and other components.
5. Weight Considerations: Electric vehicles strive to optimize weight distribution to enhance efficiency and handling. Axles in electric vehicles may be designed with lightweight materials or innovative construction techniques to minimize weight while maintaining structural integrity and durability.
It’s important to note that the specific design and characteristics of axles in electric vehicles can vary depending on the vehicle manufacturer, drivetrain configuration (e.g., front-wheel drive, rear-wheel drive, all-wheel drive), and other factors. Automotive manufacturers and suppliers continually innovate and develop new axle technologies to meet the evolving demands of electric vehicle propulsion systems.
What is the difference between front and rear axles in a typical vehicle?
In a typical vehicle, there are distinct differences between the front and rear axles due to their respective roles and functions. Here are the key differences:
- Position:
- Steering:
- Driving:
- Suspension:
- Load Distribution:
- Driving Characteristics:
The main difference between the front and rear axles is their position in the vehicle. The front axle is located in the front of the vehicle, while the rear axle is positioned at the rear. This positioning is determined by the vehicle’s drivetrain configuration.
The front axle is responsible for steering the vehicle. It is connected to the steering system, allowing the driver to control the direction of the vehicle. The front axle typically includes components such as steering knuckles, tie rods, and steering linkages.
The rear axle is primarily responsible for driving the vehicle’s wheels. It receives power from the engine through the transmission or differential and transfers that power to the rear wheels. The rear axle may include components such as axle shafts, differential gears, and wheel hubs.
Both the front and rear axles play a role in the vehicle’s suspension system, but their configurations and functions differ. The front axle typically incorporates suspension components such as control arms, struts, or independent suspension systems to provide better handling, stability, and ride comfort. The rear axle may have a solid axle setup or independent suspension depending on the vehicle’s design.
The load distribution on the front and rear axles varies. In a typical vehicle, the front axle carries the weight of the engine, transmission, and a portion of the vehicle’s weight due to the front-end weight bias. The rear axle bears the weight of the vehicle’s occupants, cargo, and a portion of the vehicle’s weight. This distribution helps maintain proper balance and stability during acceleration, braking, and cornering.
The differences between the front and rear axles can influence the vehicle’s driving characteristics. The front axle’s role in steering affects the vehicle’s maneuverability and responsiveness. The rear axle’s responsibility for driving the wheels affects traction, acceleration, and stability, particularly in rear-wheel drive or four-wheel drive vehicles.
It’s important to note that the specific configurations and characteristics of front and rear axles can vary depending on the vehicle’s make, model, and drivetrain system. Different types of vehicles, such as front-wheel drive, rear-wheel drive, or all-wheel drive, may have variations in axle design and functionality.
Understanding the differences between the front and rear axles is essential for proper maintenance, repairs, and modifications of the vehicle’s drivetrain and suspension systems. If you have specific questions about your vehicle’s axles, it’s recommended to consult your vehicle’s owner’s manual or seek advice from qualified mechanics or automotive professionals.
What are the signs of a worn or failing axle, and how can I troubleshoot axle issues?
Identifying the signs of a worn or failing axle is important for maintaining the safety and functionality of your vehicle. Here are some common signs to look out for and troubleshooting steps you can take to diagnose potential axle issues:
- Unusual Noises:
- Vibrations:
- Uneven Tire Wear:
- Difficulty Steering:
- Visible Damage or Leaks:
- Professional Inspection:
If you hear clunking, clicking, or grinding noises coming from the area around the wheels, it could indicate a problem with the axle. These noises may occur during acceleration, deceleration, or when turning. Troubleshoot by listening carefully to the location and timing of the noises to help pinpoint the affected axle.
A worn or failing axle can cause vibrations that can be felt through the steering wheel, floorboard, or seat. These vibrations may occur at certain speeds or during specific driving conditions. If you experience unusual vibrations, it’s important to investigate the cause, as it could be related to axle problems.
Inspect your tires for uneven wear patterns. Excessive wear on the inner or outer edges of the tires can be an indication of axle issues. Misaligned or damaged axles can cause the tires to tilt, leading to uneven tire wear. Regularly check your tires for signs of wear and take note of any abnormalities.
A worn or damaged axle can affect steering performance. If you experience difficulty in steering, such as stiffness, looseness, or a feeling of the vehicle pulling to one side, it may be due to axle problems. Pay attention to any changes in steering responsiveness and address them promptly.
Inspect the axles visually for any signs of damage or leaks. Look for cracks, bends, or visible fluid leaks around the axle boots or seals. Damaged or leaking axles can lead to lubrication loss and accelerated wear. If you notice any visible issues, it’s important to have them inspected and repaired by a qualified mechanic.
If you suspect axle issues but are unsure about the exact cause, it’s advisable to seek a professional inspection. A qualified mechanic can perform a thorough examination of the axles, suspension components, and related systems. They have the expertise and tools to diagnose axle problems accurately and recommend the appropriate repairs.
It’s important to note that troubleshooting axle issues can sometimes be challenging, as symptoms may overlap with other mechanical problems. If you’re uncertain about diagnosing or repairing axle issues on your own, it’s recommended to consult a professional mechanic. They can provide a proper diagnosis, ensure the correct repairs are performed, and help maintain the safety and performance of your vehicle.
editor by lmc 2024-11-05
China manufacturer Wheel Shaft, Machining Shaft, Input Shaft, Axle detroit axle
Product Description
Product Description
Our company adopts forging process to make the transmission shaft parts, which well meets the requirements of the auto industry for the stability and reliability of parts with high strength, high fatigue resistance and long aging.
According to the your requirements for product quality, our company will using high-quality steel which suitable for different mechanical properties, and die forging process, to make the excellent products .
we will not only using the heat treatment process to improve the performance of forging, but also the later machining process will strictly ensure the accuracy .
Our company is a lot of domestic and foreign automotive industry parts quality supplier.
Detailed Photos
Company Profile
ZheJiang CZPT Industry Co., Ltd. is a forging parts manufacturer from China. Our factory is located in HangZhou, the ancient capital of China, which is a famous historical and cultural city in the world. It is also an important industrial base in China. Many well-known national scientific research institutions have been established here, providing key technical support and services for the development and improvement of the industrial chain. Our company’s main business is mechanical parts product design, forging, machining. Auto parts design and production, other mechanical parts design and production, special alloy forging products research and development.
Factory photos
/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Where can I find information on axle load limits for various types of vehicles?
When seeking information on axle load limits for different types of vehicles, there are several reliable sources where you can find the necessary information. Here’s a detailed explanation of where you can find information on axle load limits:
1. Vehicle Owner’s Manual:
The first and most accessible source of information on axle load limits is the vehicle owner’s manual. The owner’s manual provided by the vehicle manufacturer typically includes important details about the vehicle’s specifications, including axle load limits. Look for sections related to vehicle loading, weight distribution, or axle specifications to find the recommended load limits for each axle of your specific vehicle model.
2. Government Transportation Authorities:
Government transportation authorities, such as departments of transportation or road transport authorities, often provide guidelines and regulations regarding vehicle weight limits, including axle load limits. These authorities establish and enforce weight restrictions to ensure road safety and prevent damage to infrastructure. Visit the website of your local or national transportation authority to access relevant regulations or guidelines pertaining to axle load limits for various types of vehicles.
3. Commercial Vehicle Regulations:
If you are specifically interested in axle load limits for commercial vehicles, such as trucks or buses, consult the commercial vehicle regulations applicable in your region. These regulations are established to ensure safe and efficient operation of commercial vehicles on public roads. Regulatory bodies responsible for commercial vehicle operations often provide detailed information on axle load limits, weight distribution requirements, and other related specifications.
4. Vehicle Manufacturer or Dealer:
If you require axle load limit information for a specific vehicle model or variant, contacting the vehicle manufacturer or a local authorized dealer can be helpful. They can provide accurate and up-to-date information specific to your vehicle. Provide them with the vehicle identification number (VIN) or other relevant details to ensure they can assist you accurately.
5. Online Resources and Databases:
There are online resources and databases dedicated to providing information on vehicle specifications, including axle load limits. These resources may include vehicle data websites, forums, or government databases that compile and provide access to vehicle specifications and regulatory information. Conduct an internet search using relevant keywords to find reliable online sources that offer information on axle load limits for various types of vehicles.
When seeking information on axle load limits, it’s crucial to ensure that the information you obtain is accurate, up-to-date, and applicable to your specific vehicle and jurisdiction. Regulations and load limits can vary depending on the country, region, vehicle type, and other factors. Therefore, it is advisable to consult official sources or seek professional advice to ensure compliance with applicable regulations and ensure safe and legal operation of your vehicle.
What is the difference between front and rear axles in a typical vehicle?
In a typical vehicle, there are distinct differences between the front and rear axles due to their respective roles and functions. Here are the key differences:
- Position:
- Steering:
- Driving:
- Suspension:
- Load Distribution:
- Driving Characteristics:
The main difference between the front and rear axles is their position in the vehicle. The front axle is located in the front of the vehicle, while the rear axle is positioned at the rear. This positioning is determined by the vehicle’s drivetrain configuration.
The front axle is responsible for steering the vehicle. It is connected to the steering system, allowing the driver to control the direction of the vehicle. The front axle typically includes components such as steering knuckles, tie rods, and steering linkages.
The rear axle is primarily responsible for driving the vehicle’s wheels. It receives power from the engine through the transmission or differential and transfers that power to the rear wheels. The rear axle may include components such as axle shafts, differential gears, and wheel hubs.
Both the front and rear axles play a role in the vehicle’s suspension system, but their configurations and functions differ. The front axle typically incorporates suspension components such as control arms, struts, or independent suspension systems to provide better handling, stability, and ride comfort. The rear axle may have a solid axle setup or independent suspension depending on the vehicle’s design.
The load distribution on the front and rear axles varies. In a typical vehicle, the front axle carries the weight of the engine, transmission, and a portion of the vehicle’s weight due to the front-end weight bias. The rear axle bears the weight of the vehicle’s occupants, cargo, and a portion of the vehicle’s weight. This distribution helps maintain proper balance and stability during acceleration, braking, and cornering.
The differences between the front and rear axles can influence the vehicle’s driving characteristics. The front axle’s role in steering affects the vehicle’s maneuverability and responsiveness. The rear axle’s responsibility for driving the wheels affects traction, acceleration, and stability, particularly in rear-wheel drive or four-wheel drive vehicles.
It’s important to note that the specific configurations and characteristics of front and rear axles can vary depending on the vehicle’s make, model, and drivetrain system. Different types of vehicles, such as front-wheel drive, rear-wheel drive, or all-wheel drive, may have variations in axle design and functionality.
Understanding the differences between the front and rear axles is essential for proper maintenance, repairs, and modifications of the vehicle’s drivetrain and suspension systems. If you have specific questions about your vehicle’s axles, it’s recommended to consult your vehicle’s owner’s manual or seek advice from qualified mechanics or automotive professionals.
Can you explain the importance of axle alignment for vehicle stability and handling?
Axle alignment plays a crucial role in ensuring vehicle stability and handling characteristics. Proper alignment of the axles is essential for maintaining optimal tire contact with the road surface, minimizing tire wear, maximizing traction, and promoting safe and predictable handling. Here are the key reasons why axle alignment is important:
- Tire Wear and Longevity:
- Optimal Traction:
- Steering Response and Stability:
- Reduced Rolling Resistance:
- Vehicle Safety:
Correct axle alignment helps distribute the vehicle’s weight evenly across all four tires. When the axles are properly aligned, the tires wear evenly, reducing the risk of premature tire wear and extending their lifespan. Misaligned axles can cause uneven tire wear patterns, such as excessive wear on the inner or outer edges of the tires, leading to the need for premature tire replacement.
Proper axle alignment ensures that the tires maintain optimal contact with the road surface. When the axles are aligned correctly, the tires can evenly distribute the driving forces, maximizing traction and grip. This is particularly important during acceleration, braking, and cornering, as proper alignment helps prevent tire slippage and improves overall vehicle stability.
Axle alignment directly affects steering response and stability. When the axles are properly aligned, the vehicle responds predictably to driver inputs, providing precise and accurate steering control. Misaligned axles can lead to steering inconsistencies, such as pulling to one side or requiring constant correction, compromising vehicle stability and handling.
Proper axle alignment helps reduce rolling resistance, which is the force required to move the vehicle forward. When the axles are aligned correctly, the tires roll smoothly and effortlessly, minimizing energy loss due to friction. This can contribute to improved fuel efficiency and reduced operating costs.
Correct axle alignment is crucial for ensuring vehicle safety. Misaligned axles can affect the vehicle’s stability, especially during emergency maneuvers or sudden lane changes. Proper alignment helps maintain the intended handling characteristics of the vehicle, reducing the risk of loss of control and improving overall safety.
To achieve proper axle alignment, several key parameters are considered, including camber, toe, and caster angles. Camber refers to the vertical tilt of the wheel when viewed from the front, toe refers to the angle of the wheels in relation to each other when viewed from above, and caster refers to the angle of the steering axis in relation to vertical when viewed from the side. These alignment angles are adjusted to meet the vehicle manufacturer’s specifications and ensure optimal performance.
It’s important to note that factors such as road conditions, driving habits, and vehicle modifications can affect axle alignment over time. Regular maintenance and periodic alignment checks are recommended to ensure that the axles remain properly aligned, promoting vehicle stability, handling, and safety.
<img src="https://img.hzpt.com/img/axles_shaft_coupling_Spline/spline_shaft_l1.webp" alt="China manufacturer Wheel Shaft, Machining Shaft, Input Shaft, Axle detroit axle”><img src="https://img.hzpt.com/img/axles_shaft_coupling_Spline/spline_shaft_l2.webp" alt="China manufacturer Wheel Shaft, Machining Shaft, Input Shaft, Axle detroit axle”>
editor by lmc 2024-11-04
China Professional Premium Trailer Axle – Stub Design for Max. Durability axle definition
Product Description
Product descriptions: |
Premium Trailer Axle – Stub Design for Max. Durability
1. Capacity: 1~15 Tons; 2. Track: can be customized; 3. Axle Beam: Round, Square for optional; 4. Brake System: with or without brake for your choice; 5. Supply professional solution for customer’s trailer; 6. Good price and high quality; |
80 Sq. beam&M18 | ||
Bearing: | 32211/32215 | |
Wheel bolt PCD | 205/160mm | |
Wheel bolt size | M18x1.5 | |
Track size | 1700mm or as request | |
Max. Axle load | ||
with 1axle | with 2axles | |
25-30km/h | 9100kg | 7900kg |
40km/h | 8200kg | 7500kg |
60km/h | 7500kg | 6800kg |
We proudly offer an extensive range of unbraked straight axles, expertly engineered to accommodate load capacities spHangZhou from 3000kg all the way up to an impressive 15000kg. We would love the opportunity to engage in a detailed conversation with you to explore how our products can meet your specific needs.
These axles are expertly designed for a variety of vehicles, ensuring versatility and reliability in diverse applications:
Baler, Hydraulic flip plow, expertly crafted for optimal performance
When making your selection, please take into account the following considerations:
To ensure optimal performance, take into consideration the vehicle’s fully loaded and empty load conditions, while also factoring in essential safety parameters. This axle type is specifically designed for vehicles operating at speeds below 60km/h, ensuring a secure and reliable experience.
FAQ: Trailer Axles and Accessories |
Q1: Do you offer custom trailer axle designs? A: Yes, we provide custom trailer axles based on your specifications, including length, weight capacity, and material. If you send us drawings or specific measurements, we can manufacture to your requirements. Q2: What materials are your trailer axles made from? Q3: Can you supply axles with brakes? Q4: How do I measure for a replacement axle? Q5: Do your axles come pre-assembled with hubs and bearings? Q6: What is the lead time for custom axle orders? Q7: What shipping options do you offer? Q8: Do you offer warranties on your products? Q9: Can you produce axles for boat trailers? Q10: Is it possible to request samples? Q11: Do you offer OEM services? Q12: Can I track my order? Q13: What payment methods do you accept? Q14: How can I ensure my axles fit my trailer? Q15: Do you ship internationally? |
About Service: |
1-Welcome OEM
2-Our service
3-Welcome to visit
4-Warranty
5-After service
|
/* May 10, 2571 16:49:51 */!function(){function d(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
Are there guidelines for choosing the right axle for towing heavy loads?
When it comes to towing heavy loads, selecting the appropriate axle is crucial for ensuring safe and efficient towing performance. While the specific guidelines may vary depending on the vehicle and towing requirements, there are general considerations to keep in mind when choosing the right axle. Here’s a detailed explanation of the guidelines for selecting the right axle for towing heavy loads:
Gross Axle Weight Rating (GAWR):
One of the primary factors to consider is the Gross Axle Weight Rating (GAWR) provided by the vehicle manufacturer. The GAWR specifies the maximum weight that an axle is designed to support safely. It is essential to ensure that the selected axle’s GAWR is sufficient to handle the anticipated weight of the loaded trailer and any additional cargo or passengers in the towing vehicle. Exceeding the GAWR can lead to axle failure, compromised handling, and safety risks.
Towing Capacity:
Check the towing capacity of your vehicle, which represents the maximum weight that the vehicle is rated to tow. The axle’s capacity should align with the towing capacity to ensure safe and efficient towing. Consider the type and size of the trailer you intend to tow, including its loaded weight, tongue weight, and any weight distribution considerations. The axle should be capable of handling the anticipated load without exceeding its capacity.
Matching Axle and Suspension:
The axle and suspension system work together to support the weight of the vehicle and the trailer being towed. It is important to ensure that the axle and suspension are properly matched to provide adequate support and stability. Consider the type of suspension (leaf springs, coil springs, air suspension) and the axle’s design (solid axle, independent suspension) to ensure compatibility and optimal towing performance.
Braking System:
When towing heavy loads, the braking system plays a critical role in maintaining control and safety. Ensure that the axle is equipped with appropriate brakes that can handle the increased load. Consider the type of brakes, such as electric brakes or hydraulic brakes, and their capacity to provide sufficient stopping power for the combined weight of the towing vehicle and trailer.
Weight Distribution:
Proper weight distribution is essential for safe towing. The axle should be selected based on the anticipated weight distribution between the towing vehicle and the trailer. Consider factors like tongue weight and the use of weight distribution hitches or sway control devices to ensure balanced weight distribution and optimal handling characteristics.
Consult Manufacturer Recommendations:
Always refer to the vehicle manufacturer’s recommendations, specifications, and guidelines when selecting an axle for towing heavy loads. The manufacturer’s guidelines will provide accurate and vehicle-specific information to help you make the right choice. Consult the owner’s manual or contact the manufacturer directly for any specific towing-related recommendations.
It’s important to note that towing requirements and axle specifications can vary depending on the vehicle make and model, as well as regional regulations. It is advisable to consult with automotive experts, such as mechanics or dealerships, who have expertise in towing and can provide specific recommendations based on your vehicle and towing needs.
Are there specific maintenance tips to extend the lifespan of my vehicle’s axles?
Maintaining the axles of your vehicle is crucial for ensuring their longevity, performance, and overall safety. Here are some specific maintenance tips to extend the lifespan of your vehicle’s axles:
- Regular Inspection:
- Lubrication:
- Seal Inspection and Replacement:
- Proper Loading and Towing:
- Driving Techniques:
- Regular Wheel Alignment:
- Proper Tire Inflation:
- Service Intervals:
Perform regular visual inspections of the axles to check for any signs of damage, leaks, or excessive wear. Look for cracks, bends, or rust on the axle housing, and inspect the axle shafts, seals, and boots. Early detection of issues can help prevent further damage and costly repairs.
Follow the manufacturer’s recommendations for axle lubrication. Proper lubrication helps reduce friction and wear on the axle components. Regularly check the axle’s lubricant level and quality, and replace it as necessary. Use the recommended lubricant type and viscosity for your specific axle.
Check the axle seals for any signs of leaks, such as fluid accumulation around the axle ends. Leaking seals can allow contaminants to enter the axle assembly, leading to premature wear and damage. Replace worn or damaged seals promptly to maintain proper lubrication and prevent contamination.
Ensure that you do not exceed the weight capacity of your vehicle’s axles. Overloading or towing beyond the recommended limits can put excessive stress on the axles, leading to premature wear or failure. Be mindful of the payload and towing capacity specified by the vehicle manufacturer.
Adopt proper driving techniques to minimize stress on the axles. Avoid sudden acceleration, aggressive cornering, and harsh braking, as these actions can subject the axles to excessive forces. Additionally, be cautious when driving over rough terrain or obstacles to prevent impacts that could damage the axles.
Maintain proper wheel alignment to prevent excessive strain on the axles. Misaligned wheels can put uneven loads on the axles, leading to accelerated wear. Regularly check and adjust the wheel alignment as per the manufacturer’s recommendations.
Ensure that your vehicle’s tires are properly inflated according to the recommended tire pressure. Underinflated or overinflated tires can affect the load distribution on the axles and increase the risk of axle damage. Regularly check and maintain the correct tire pressure.
Follow the recommended service intervals for your vehicle, which may include axle inspections, lubricant changes, and other maintenance tasks. Adhering to these intervals ensures that the axles are properly maintained and any potential issues are addressed in a timely manner.
It’s important to consult your vehicle’s owner’s manual for specific maintenance guidelines and intervals provided by the manufacturer. Additionally, if you notice any unusual noises, vibrations, or handling issues related to the axles, it is advisable to have your vehicle inspected by a qualified mechanic to identify and address any potential axle problems promptly.
Are there aftermarket axles available for upgrading performance in off-road vehicles?
Yes, there are aftermarket axles available for upgrading performance in off-road vehicles. Off-road enthusiasts often seek aftermarket axle options to enhance the durability, strength, and performance of their vehicles in rugged and demanding terrains. Here’s some information about aftermarket axles for off-road applications:
1. Upgraded Axle Materials:
Aftermarket axles are typically made from high-strength materials such as chromoly steel or forged alloys. These materials offer superior strength and durability compared to stock axles, making them better suited for off-road use where extreme loads, impacts, and torsional forces are encountered.
2. Increased Axle Shaft Diameter:
Some aftermarket axles feature larger diameter shafts compared to stock axles. This increased diameter helps improve the axle’s load-carrying capacity and resistance to bending or torsion. It can also enhance the overall durability and reliability of the axle in off-road conditions.
3. Upgraded Axle Splines:
Axles with upgraded splines are designed to handle higher torque loads. Aftermarket axles may feature larger and stronger splines, providing increased power transfer capabilities and reducing the risk of spline failure, which can occur in extreme off-road situations.
4. Locking Differentials:
Some aftermarket axle options include integrated locking differentials. Locking differentials improve off-road traction by mechanically locking both wheels on an axle together, ensuring that power is distributed evenly to both wheels. This feature can be advantageous in challenging off-road conditions where maximum traction is required.
5. Lifted Vehicle Compatibility:
Aftermarket axles are often designed to accommodate lifted vehicles. Lift kits that raise the suspension height can impact the axle’s operating angles. Aftermarket axles may offer increased articulation or modified geometry to maintain proper alignment and reduce the risk of binding or premature wear.
When considering aftermarket axles for off-road vehicles, it’s essential to choose options that are compatible with your specific vehicle make, model, and suspension setup. Working with reputable manufacturers, consulting with experienced off-road enthusiasts, or seeking advice from professional mechanics can help you select the most suitable aftermarket axle upgrades for your off-road needs.
Lastly, it’s important to keep in mind that upgrading axles alone may not be sufficient for maximizing off-road performance. Other components such as suspension, tires, differential gears, and drivetrain systems should be considered as part of a comprehensive off-road build to ensure optimal performance, reliability, and safety.
<img src="https://img.hzpt.com/img/axles_shaft_coupling_Spline/spline_shaft_l1.webp" alt="China Professional Premium Trailer Axle – Stub Design for Max. Durability axle definition”><img src="https://img.hzpt.com/img/axles_shaft_coupling_Spline/spline_shaft_l2.webp" alt="China Professional Premium Trailer Axle – Stub Design for Max. Durability axle definition”>
editor by lmc 2024-11-04
China factory 10t 127mm Round Axle Beam American Loose Type Drop Center Axle with high quality
American Loose Type Drop Center Axle
Our American Loose Type Drop Center Axles are high-quality products manufactured by HangZhou TND Axle Co. Ltd. This product has a 10t capacity and a 127mm round axle beam. It is manufactured in China and is available worldwide.
Product Description
The American Loose Type Drop Center Axle is a reliable and durable product designed for use in trailers, semi-trailers, and other heavy-duty vehicles. It is made of high-quality materials to ensure its longevity.
This axle has a lead time of 25 days for quantities of 1-100 units, 40 days for quantities between 101-300 units, and can be negotiated for quantities over 300 units.
Optional track length, ABS, and automatic slack adjuster are available. Please note that the rights to change the product’s design and specification are reserved.
Technology
Our company has developed the technology of thickening integral shaft by hot extrusion molding with its own intellectual property rights. This self-designed hot-extrusion thickening integrated Axle technology is the first in the world to realize simultaneous thickening and extrusion, and the thickness of the axle end bearing can be customized according to the customer’s special request.
Packaging and Delivery
The goods will be packed according to your requirements and in well protection before delivery, using plastic wrap and wooden pallets.
Frequently Asked Questions
1. What products does your company offer?
A: Our company mainly supplies various industrial products such as agricultural gearboxes, power output shafts, sprockets, hydraulic couplings, worm gear reducers, racks, roller chains, pulleys, planetary gearboxes, timing pulleys, bushings, etc.
2. Can you customize the products based on our requirements?
A: Yes, we welcome customization based on drawings and samples provided by our customers.
3. What makes your American Loose Type Drop Center Axle stand out from other similar products?
A: Our American Loose Type Drop Center Axle is made of high-quality materials and is manufactured using our patented hot-extrusion thickening integrated Axle technology. This technology allows us to customize the thickness of the axle end bearing according to the customer’s special request.
4. How long is the delivery time?
A: For quantities of 1-100 units, the lead time is 25 days. For quantities between 101-300 units, the lead time is 40 days. Quantities over 300 units can be negotiated.
5. What is your pricing policy?
A: We will quote you the best price possible based on your requirements. Please let us know the quantity and material of the product you need. The more quantity ordered, the better the price offered.
Performance Characteristics of Axle
Axles are crucial components in various vehicles and machinery, providing support and allowing rotational movement. The performance characteristics of axles include load-bearing capacity, durability, and wear resistance. Axles should be able to bear the weight of the vehicle or machinery and maintain stability during operation. Durability is essential as axles are subjected to constant stress and pressure, and wear resistance is necessary to prevent damage and prolong the lifespan of axles.
Types and Characteristics of Axle
There are several types of axles, including straight, drop, and stub axles. Straight axles are the simplest type, consisting of a single shaft connecting the wheels. Drop axles are designed for larger vehicles and feature a drop in the center to lower the ride height. Stub axles are used in trailers and have a pivot point that allows the wheels to turn. The characteristics of axles vary depending on the type and application, but they all share the ability to support and rotate wheels.
Advantages of Axle Made of Different Materials
Axles can be made of various materials, including steel, aluminum, and titanium. Steel axles are durable and strong, making them ideal for heavy-duty applications. Aluminum axles are lightweight and corrosion-resistant, making them suitable for high-performance applications. Titanium axles are strong, lightweight, and corrosion-resistant, making them ideal for racing and other high-performance applications. The choice of material depends on the intended application and performance requirements.
Application of Axle in Various Fields
Axles are essential components in various fields, including the automotive industry, heavy machinery, trailers, railway systems, bicycles, and more. In the automotive industry, axles are used in cars, trucks, and other vehicles to support and rotate the wheels. Heavy machinery such as excavators, bulldozers, and cranes also use axles to provide support and movement. Trailers and railway systems require axles to support and move cargo and passengers. Bicycles use axles to support and rotate the wheels, providing the rider with propulsion and stability.
Future Development Trends and Opportunities of Axle Products
The future development of axle products is focused on improving performance and reducing weight. Lightweight materials such as carbon fiber and composites are being used to reduce the weight of axles while maintaining strength and durability. Advancements in technology, such as 3D printing, are also being used to create complex geometries and designs that improve performance and reduce weight. The increasing demand for electric and autonomous vehicles is also creating opportunities for new axle designs and applications.
Choosing a Suitable Axle
The choice of a suitable axle depends on several factors, including load capacity, material, type of axle, dimensions and specifications, braking system compatibility, and application type. The load capacity should be sufficient to support the weight of the vehicle or machinery. The material should be chosen based on the intended application and performance requirements. The type of axle should be selected based on the vehicle or machinery design. The dimensions and specifications should be compatible with the vehicle or machinery. The braking system compatibility should be considered to ensure proper operation. The application type should be evaluated to determine the appropriate axle design and performance characteristics.
Conclusion
In conclusion, axles are crucial components in various vehicles and machinery, providing support and allowing rotational movement. The performance characteristics of axles include load-bearing capacity, durability, and wear resistance. The choice of material depends on the intended application and performance requirements. Axles are used in various fields, including the automotive industry, heavy machinery, trailers, railway systems, bicycles, and more. The future development of axle products is focused on improving performance and reducing weight, creating opportunities for new designs and applications.
Author: Dream
All the content of the page is from the Internet, the content is only as a reference for product selection, our products are replacement parts and not original spare parts; we are not the holder of the original trademarks of the content, our products are only suitable for after-sales replacement parts and not original spare parts, our replacement parts can be perfectly adapted to the original spare parts; if you need to buy original spare parts, please contact the original factory to buy. If you want to buy original spare parts, please contact the original supplier for purchase.
China best German Type 16t Assemble Truck Rear Steer Axles for Trailer 25 Ton American Type Axle Rear Steer Axle air compressor for car
German Type 16t Assemble Truck Rear Steer Axles for Trailer
The German Type 16t Assemble Truck Rear Steer Axles for Trailer are high-quality trailer axles that are designed to provide superior performance in a variety of applications. These axles are made from top-quality materials and are built to last, ensuring that your trailer will provide reliable service for years to come.
Product Description
The China best American Type Axle Rear Steer Axle air compressor for car and Manufacturer 8t-25t American Inboard Built-in Brake Drum Axle for Trailer truck is a highly versatile and reliable piece of equipment that is ideal for a wide range of applications. It features a range of advanced design features and technologies that make it one of the most advanced trailer axles on the market today.
Features and Benefits
- High-quality construction materials
- Advanced design features and technologies
- Superior performance and reliability
- Designed to provide long-lasting service life
- Easy to install and maintain
Specifications
The China best American Type Axle Rear Steer Axle air compressor for car and Manufacturer 8t-25t American Inboard Built-in Brake Drum Axle for Trailer truck is available in a range of different specifications to suit the needs of a variety of different applications. Some of the key specifications of this product include:
Axle Type | Max Capacity(t) | Track(mm) | Brake(mm) | Spring Seat Installation | Axle Beam(mm) | Centre Distance Of Brake Chamber(mm) | Wheel Fixing | Total Length(mm) | Recommended Wheel | Axle Wright(kg) | ||
Stud | P.C.D(mm) | H(mm) | ||||||||||
JS08Y2C15 | 8 | 1850 | 420*150 | >=1080 | 127 | 428 | 10*M22*1.5 ISO | 335 | 280.8 | ~2145 | 7.5V-20 | 323 |
JS13Y9C10 | 13 | 1840 | 420*180 | >=970 | 127 | 380 | 10*M22*1.5 ISO | 335 | 280.8 | ~2180 | 7.5V-20 | 342 |
JS13F1B10 | 13 | 1840 | 420*180 | >=930 | 150 | 380 | 10*M22*1.5 ISO | 335 | 280.8 | ~2180 | 7.5V-20 | 340 |
JS14F1B11 | 14 | 1840 | 420*220 | >=930 | 150 | 340 | 10*M22*1.5 ISO | 335 | 280.8 | ~2180 | 7.5V-20 | 358 |
JS15F6B11 | 15 | 1850 | 420*180 | >=940 | 150 | 390 | 10*M22*1.5 ISO | 335 | 280.8 | ~2200 | 8.0V-20 | 370 |
JS16F6B11 | 16 | 1850 | 420*220 | >=940 | 150 | 350 | 10*M22*1.5 ISO | 335 | 280.8 | ~2200 | 8.0V-20 | 388 |
JS20F8B12 | 20 | 1850 | 420*220 | >=940 | 150 | 345 | 10*M24*1.5 ISO | 335 | 280.8 | ~2247 | 8.0V-20 | 430 |
JS25H8B12 | 25 | 1850 | 420*220 | >=940 | 150 | 340 | 10*M24*1.5 ISO | 335 | 280.8 | ~2215 | 8.0V-20 | 474 |
Detailed Photos
Packaging & Shipping
We offer a range of packaging and shipping options to suit the needs of our customers. Our products are carefully packaged to ensure that they are delivered to our customers in perfect condition, and we work closely with our shipping partners to ensure that our products are delivered on time and at a competitive price.
Frequently Asked Questions (FAQs)
1. What is the load capacity of the China best American Type Axle Rear Steer Axle?
The load capacity of the China best American Type Axle Rear Steer Axle varies depending on the specific model. Please refer to the specifications table for more information.
2. Is the China best American Type Axle Rear Steer Axle easy to install?
Yes, the China best American Type Axle Rear Steer Axle is designed to be easy to install and maintain. However, we recommend that installation be carried out by a professional mechanic to ensure that the axle is installed correctly and safely.
3. What kind of materials are used to make the China best American Type Axle Rear Steer Axle?
The China best American Type Axle Rear Steer Axle is made from high-quality materials that are designed to provide superior strength, durability, and performance. These materials include top-quality steel, aluminum, and other alloys.
4. What kind of maintenance does the China best American Type Axle Rear Steer Axle require?
The China best American Type Axle Rear Steer Axle is designed to be low-maintenance, but regular inspections and maintenance are recommended to ensure that the axle is functioning properly and to prevent damage or wear.
5. Can the China best American Type Axle Rear Steer Axle be customized to suit specific requirements?
Yes, the China best American Type Axle Rear Steer Axle can be customized to suit the specific needs of our customers. Please contact us to discuss your requirements and to receive a quote.
Our company offers a wide range of other high-quality industrial products, including agricultural gearboxes, power output shafts, sprockets, hydraulic couplings, worm gear reducers, racks, roller chains, pulleys, planetary gearboxes, timing pulleys, bushings, and more. We are committed to providing our customers with the highest-quality products, the best prices, and the most thoughtful service possible. Customers are welcome to customize their products with drawings and samples.
Performance Characteristics of Axle
Axles are crucial components in various vehicles and machinery, providing support and allowing rotational movement. The performance characteristics of axles include load-bearing capacity, durability, and wear resistance. Axles should be able to bear the weight of the vehicle or machinery and maintain stability during operation. Durability is essential as axles are subjected to constant stress and pressure, and wear resistance is necessary to prevent damage and prolong the lifespan of axles.
Types and Characteristics of Axle
There are several types of axles, including straight, drop, and stub axles. Straight axles are the simplest type, consisting of a single shaft connecting the wheels. Drop axles are designed for larger vehicles and feature a drop in the center to lower the ride height. Stub axles are used in trailers and have a pivot point that allows the wheels to turn. The characteristics of axles vary depending on the type and application, but they all share the ability to support and rotate wheels.
Advantages of Axle Made of Different Materials
Axles can be made of various materials, including steel, aluminum, and titanium. Steel axles are durable and strong, making them ideal for heavy-duty applications. Aluminum axles are lightweight and corrosion-resistant, making them suitable for high-performance applications. Titanium axles are strong, lightweight, and corrosion-resistant, making them ideal for racing and other high-performance applications. The choice of material depends on the intended application and performance requirements.
Application of Axle in Various Fields
Axles are essential components in various fields, including the automotive industry, heavy machinery, trailers, railway systems, bicycles, and more. In the automotive industry, axles are used in cars, trucks, and other vehicles to support and rotate the wheels. Heavy machinery such as excavators, bulldozers, and cranes also use axles to provide support and movement. Trailers and railway systems require axles to support and move cargo and passengers. Bicycles use axles to support and rotate the wheels, providing the rider with propulsion and stability.
Future Development Trends and Opportunities of Axle Products
The future development of axle products is focused on improving performance and reducing weight. Lightweight materials such as carbon fiber and composites are being used to reduce the weight of axles while maintaining strength and durability. Advancements in technology, such as 3D printing, are also being used to create complex geometries and designs that improve performance and reduce weight. The increasing demand for electric and autonomous vehicles is also creating opportunities for new axle designs and applications.
Choosing a Suitable Axle
The choice of a suitable axle depends on several factors, including load capacity, material, type of axle, dimensions and specifications, braking system compatibility, and application type. The load capacity should be sufficient to support the weight of the vehicle or machinery. The material should be chosen based on the intended application and performance requirements. The type of axle should be selected based on the vehicle or machinery design. The dimensions and specifications should be compatible with the vehicle or machinery. The braking system compatibility should be considered to ensure proper operation. The application type should be evaluated to determine the appropriate axle design and performance characteristics.
Conclusion
In conclusion, axles are crucial components in various vehicles and machinery, providing support and allowing rotational movement. The performance characteristics of axles include load-bearing capacity, durability, and wear resistance. The choice of material depends on the intended application and performance requirements. Axles are used in various fields, including the automotive industry, heavy machinery, trailers, railway systems, bicycles, and more. The future development of axle products is focused on improving performance and reducing weight, creating opportunities for new designs and applications.
Author: Dream
All the content of the page is from the Internet, the content is only as a reference for product selection, our products are replacement parts and not original spare parts; we are not the holder of the original trademarks of the content, our products are only suitable for after-sales replacement parts and not original spare parts, our replacement parts can be perfectly adapted to the original spare parts; if you need to buy original spare parts, please contact the original factory to buy. If you want to buy original spare parts, please contact the original supplier for purchase.
China Custom 2200lbs Capacity 5bolt Trailer Parts Rubber Unbraked Half Torsion Beam Spindle Stub Axles with Idler Wheel air compressor portable
China Custom 2200lbs Capacity 5bolt Trailer Parts Rubber Unbraked Half Torsion Beam Spindle Stub Axles with Idler Wheel
Product Description
If you’re in need of high-quality trailer parts, look no further than our China Custom 2200lbs Capacity 5bolt Trailer Parts Rubber Unbraked Half Torsion Beam Spindle Stub Axles with Idler Wheel. These axles offer a wide range of load capacity options to meet your specific requirements. With their strong and durable spindle, they are built to last and are easy to replace if needed. Not only do these axles provide a smooth and quiet ride, but they can also eliminate the need for a separate trailer axle.
Part Number | Hub Type | Cap. Per Pair | P.C.D. | HUB Face (TR) | Axle Length | Start Angle | Finish |
TA1100HN | Idler Hub | 1100 lbs | 4-4.0″, 5-4.5″ | Flexible | 600mm | various | Black/Galv. |
TA1750HN | Idler Hub | 1750 lbs | 4-4.0″, 5-4.5″ | Flexible | 600mm | various | Black/Galv. |
TA2200HN | Idler Hub | 2200 lbs | 4-4.0″, 5-4.5″ | Flexible | 650mm | various | Black/Galv. |
TA2200HE | 9″ Electric Brake Hub | 2200 lbs | 4-4.0″, 5-4.5″ | Flexible | 650mm | various | Black/Galv. |
TA2200HH | 9″ Hydraulic Brake Hub | 2200 lbs | 4-4.0″, 5-4.5″ | Flexible | 650mm | various | Black/Galv. |
TA3500HE | 10″ Electric Brake Hub | 3500 lbs | 5-4.5″, 6-5.5″ | Flexible | 800mm | various | Black/Galv. |
TA3500HH | 10″ Hydraulic Brake Hub | 3500 lbs | 5-4.5″, 6-5.5″ | Flexible | 800mm | various | Black/Galv. |
Frequently Asked Questions
1) Do you have a factory?
Yes, we have our own factory equipped with experienced engineers who can meet your unique requirements.
2) Do you provide samples? Is there a cost?
Yes, we can provide samples for you to check and approve. Please note that there may be a cost for normal samples, but it can be considered for return once an order is placed.
3) What is your MOQ?
For trailer axles, our MOQ is 100 units. For trailer axle parts assembly, the MOQ is 3000 units.
4) Can you manufacture parts according to our specific size?
Yes, we can support your request for specific sizes by making tooling adjustments.
5) What are your payment terms?
For bulk orders, we generally accept TT (telegraphic transfer) payment. Irrevocable L/C (letter of credit) at sight is also workable. For samples, we accept payment via Paypal.
If you have any other questions or inquiries, please feel free to contact us. We are here to provide you with high-quality products, competitive prices, and excellent customer service.
Our company also specializes in various other industrial products, including agricultural gearboxes, power output shafts, sprockets, hydraulic couplings, worm gear reducers, racks, roller chains, pulleys, planetary gearboxes, timing pulleys, and bushings. We welcome customizations based on your drawings and samples.
Other Products and Businesses
In addition to our trailer parts, we offer a wide range of other products and services. Whether you need agricultural gearboxes, power output shafts, or hydraulic couplings, we have you covered. Our products are of the highest quality, competitively priced, and backed by our commitment to exceptional customer service. Feel free to explore our website or contact us for more information.
Performance Characteristics of Axle
Axles are crucial components in various vehicles and machinery, providing support and allowing rotational movement. The performance characteristics of axles include load-bearing capacity, durability, and wear resistance. Axles should be able to bear the weight of the vehicle or machinery and maintain stability during operation. Durability is essential as axles are subjected to constant stress and pressure, and wear resistance is necessary to prevent damage and prolong the lifespan of axles.
Types and Characteristics of Axle
There are several types of axles, including straight, drop, and stub axles. Straight axles are the simplest type, consisting of a single shaft connecting the wheels. Drop axles are designed for larger vehicles and feature a drop in the center to lower the ride height. Stub axles are used in trailers and have a pivot point that allows the wheels to turn. The characteristics of axles vary depending on the type and application, but they all share the ability to support and rotate wheels.
Advantages of Axle Made of Different Materials
Axles can be made of various materials, including steel, aluminum, and titanium. Steel axles are durable and strong, making them ideal for heavy-duty applications. Aluminum axles are lightweight and corrosion-resistant, making them suitable for high-performance applications. Titanium axles are strong, lightweight, and corrosion-resistant, making them ideal for racing and other high-performance applications. The choice of material depends on the intended application and performance requirements.
Application of Axle in Various Fields
Axles are essential components in various fields, including the automotive industry, heavy machinery, trailers, railway systems, bicycles, and more. In the automotive industry, axles are used in cars, trucks, and other vehicles to support and rotate the wheels. Heavy machinery such as excavators, bulldozers, and cranes also use axles to provide support and movement. Trailers and railway systems require axles to support and move cargo and passengers. Bicycles use axles to support and rotate the wheels, providing the rider with propulsion and stability.
Future Development Trends and Opportunities of Axle Products
The future development of axle products is focused on improving performance and reducing weight. Lightweight materials such as carbon fiber and composites are being used to reduce the weight of axles while maintaining strength and durability. Advancements in technology, such as 3D printing, are also being used to create complex geometries and designs that improve performance and reduce weight. The increasing demand for electric and autonomous vehicles is also creating opportunities for new axle designs and applications.
Choosing a Suitable Axle
The choice of a suitable axle depends on several factors, including load capacity, material, type of axle, dimensions and specifications, braking system compatibility, and application type. The load capacity should be sufficient to support the weight of the vehicle or machinery. The material should be chosen based on the intended application and performance requirements. The type of axle should be selected based on the vehicle or machinery design. The dimensions and specifications should be compatible with the vehicle or machinery. The braking system compatibility should be considered to ensure proper operation. The application type should be evaluated to determine the appropriate axle design and performance characteristics.
Conclusion
In conclusion, axles are crucial components in various vehicles and machinery, providing support and allowing rotational movement. The performance characteristics of axles include load-bearing capacity, durability, and wear resistance. The choice of material depends on the intended application and performance requirements. Axles are used in various fields, including the automotive industry, heavy machinery, trailers, railway systems, bicycles, and more. The future development of axle products is focused on improving performance and reducing weight, creating opportunities for new designs and applications.
Author: Dream
All the content of the page is from the Internet, the content is only as a reference for product selection, our products are replacement parts and not original spare parts; we are not the holder of the original trademarks of the content, our products are only suitable for after-sales replacement parts and not original spare parts, our replacement parts can be perfectly adapted to the original spare parts; if you need to buy original spare parts, please contact the original factory to buy. If you want to buy original spare parts, please contact the original supplier for purchase.
China wholesaler High-Quality Wheel Side Front Axle for Lada Vaz Models 21214-2201012 Cardan manufacturer
High-Quality Wheel Side Front Axle for Lada Vaz Models 21214-2201012
Product Description
The wheel side front axle is a high-quality component designed specifically for Lada Vaz models 21214-2201012. It is manufactured by a reliable and experienced wholesaler in China.
Model 2 Drive Shaft Introduction
The drive shaft is an essential part of the automotive transmission system. It is responsible for transferring engine power to the wheels, ensuring smooth vehicle operation and excellent handling performance.
Product Overview
The 2 drive shaft is constructed using high-strength alloy steel, providing exceptional wear resistance and fatigue strength. It undergoes precision machining to ensure dimensional accuracy and surface smoothness, resulting in enhanced durability. The lightweight design contributes to improved fuel efficiency and handling. Additionally, the drive shaft is treated to resist corrosion, making it suitable for various challenging environments.
Applications
This drive shaft is widely used in sedans, SUVs, and commercial vehicles. It is compatible with front-wheel drive, rear-wheel drive, and four-wheel drive systems, satisfying diverse powertrain needs.
Installation and Maintenance
- Installation: It is important to follow the vehicle manufacturer’s installation manual for proper alignment and secure fastening of the drive shaft.
- Maintenance: Regularly check the drive shaft’s working condition for excessive wear and corrosion. Ensure proper lubrication to extend its lifespan.
Summary
The 2 drive shaft is an indispensable component of modern automotive transmission systems. Its exceptional performance and reliability provide robust power support and driving stability to your vehicle.
PRODUCTS NAME | Drive Shaft |
VEHICLE FITMENT | UAZ |
LENGTH | 8 |
Warranty | 1 Year |
Condition: | NEW |
Color: | BLACK/STEEL |
Certification: | ISO, TS16949 |
Type: | Drive Shaft |
This is just one of the high-quality products we offer. Our company specializes in supplying various industrial products ranging from agricultural gearboxes, power output shafts, sprockets, hydraulic couplings, worm gear reducers, racks, roller chains, pulleys, planetary gearboxes, timing pulleys, to bushings. We take pride in offering excellent products at preferential prices, along with thoughtful services. Customers are welcome to customize products based on their drawings and samples.
Frequently Asked Questions
- What are the main features of the 2 drive shaft?
- Which vehicle models are compatible with this drive shaft?
- How should I install the drive shaft?
- What maintenance should I perform on the drive shaft?
- Can I customize the drive shaft to fit my specific requirements?
Performance Characteristics of Axle
Axles are crucial components in various vehicles and machinery, providing support and allowing rotational movement. The performance characteristics of axles include load-bearing capacity, durability, and wear resistance. Axles should be able to bear the weight of the vehicle or machinery and maintain stability during operation. Durability is essential as axles are subjected to constant stress and pressure, and wear resistance is necessary to prevent damage and prolong the lifespan of axles.
Types and Characteristics of Axle
There are several types of axles, including straight, drop, and stub axles. Straight axles are the simplest type, consisting of a single shaft connecting the wheels. Drop axles are designed for larger vehicles and feature a drop in the center to lower the ride height. Stub axles are used in trailers and have a pivot point that allows the wheels to turn. The characteristics of axles vary depending on the type and application, but they all share the ability to support and rotate wheels.
Advantages of Axle Made of Different Materials
Axles can be made of various materials, including steel, aluminum, and titanium. Steel axles are durable and strong, making them ideal for heavy-duty applications. Aluminum axles are lightweight and corrosion-resistant, making them suitable for high-performance applications. Titanium axles are strong, lightweight, and corrosion-resistant, making them ideal for racing and other high-performance applications. The choice of material depends on the intended application and performance requirements.
Application of Axle in Various Fields
Axles are essential components in various fields, including the automotive industry, heavy machinery, trailers, railway systems, bicycles, and more. In the automotive industry, axles are used in cars, trucks, and other vehicles to support and rotate the wheels. Heavy machinery such as excavators, bulldozers, and cranes also use axles to provide support and movement. Trailers and railway systems require axles to support and move cargo and passengers. Bicycles use axles to support and rotate the wheels, providing the rider with propulsion and stability.
Future Development Trends and Opportunities of Axle Products
The future development of axle products is focused on improving performance and reducing weight. Lightweight materials such as carbon fiber and composites are being used to reduce the weight of axles while maintaining strength and durability. Advancements in technology, such as 3D printing, are also being used to create complex geometries and designs that improve performance and reduce weight. The increasing demand for electric and autonomous vehicles is also creating opportunities for new axle designs and applications.
Choosing a Suitable Axle
The choice of a suitable axle depends on several factors, including load capacity, material, type of axle, dimensions and specifications, braking system compatibility, and application type. The load capacity should be sufficient to support the weight of the vehicle or machinery. The material should be chosen based on the intended application and performance requirements. The type of axle should be selected based on the vehicle or machinery design. The dimensions and specifications should be compatible with the vehicle or machinery. The braking system compatibility should be considered to ensure proper operation. The application type should be evaluated to determine the appropriate axle design and performance characteristics.
Conclusion
In conclusion, axles are crucial components in various vehicles and machinery, providing support and allowing rotational movement. The performance characteristics of axles include load-bearing capacity, durability, and wear resistance. The choice of material depends on the intended application and performance requirements. Axles are used in various fields, including the automotive industry, heavy machinery, trailers, railway systems, bicycles, and more. The future development of axle products is focused on improving performance and reducing weight, creating opportunities for new designs and applications.
Author: Dream
All the content of the page is from the Internet, the content is only as a reference for product selection, our products are replacement parts and not original spare parts; we are not the holder of the original trademarks of the content, our products are only suitable for after-sales replacement parts and not original spare parts, our replacement parts can be perfectly adapted to the original spare parts; if you need to buy original spare parts, please contact the original factory to buy. If you want to buy original spare parts, please contact the original supplier for purchase.
China Custom 12t 14t 16t 18t BPW Germany Type Trailer Truck Axle for Semi Trailer Vehicle Part air compressor for car
China Custom 12t 14t 16t 18t BPW Germany Type Trailer Truck Axle for Semi Trailer Vehicle Part air compressor for car
Product Description
Introducing our China Custom Trailer Truck Axle, designed for semi trailer vehicles. This axle is manufactured with precision and adheres to high-quality standards. It is compatible with various trailer types and provides reliable performance on the road.
Key Features:
- Capacity: 12t, 14t, 16t, 18t
- Axle Type: BPW Germany Type
- High-quality construction and materials
- Customizable according to specific requirements
- Designed for optimal performance and durability
Product Specifications
Our China Custom Trailer Truck Axle comes in different capacities and dimensions. Here are the specifications for our 16t Axle:
Part No. | Max. Capacity | Distance of Chamber | Track | Axle Beam | Brake Size | Length | Bearing | Weight |
---|---|---|---|---|---|---|---|---|
XDE16-2001 | 16000 | 356 | 1850 | 150 | 420×200 | 2242 | 32314/32222 | 468 |
Our 16t Axle is designed with a maximum capacity of 16000 and features a durable axle beam, suitable for heavy loads. Its track width and axle beam dimensions ensure stability and performance on the road. With high-quality bearings and precise construction, this axle provides reliable and safe operation.
Product Images
FAQs
1. What are the different capacities available for the China Custom Trailer Truck Axle?
The China Custom Trailer Truck Axle is available in capacities ranging from 12t to 18t. This allows you to choose the axle that best suits your specific requirements.
2. Can the China Custom Trailer Truck Axle be customized?
Yes, the China Custom Trailer Truck Axle can be customized according to your specific needs. Our team can work with you to create an axle that meets your unique requirements.
3. Is the China Custom Trailer Truck Axle compatible with all types of semi trailers?
Yes, the China Custom Trailer Truck Axle is designed to be compatible with various types of semi trailers. Whether you have a flatbed trailer, a container trailer, or any other type, this axle can provide reliable performance.
4. Are the bearings of the China Custom Trailer Truck Axle of high quality?
Yes, the China Custom Trailer Truck Axle is equipped with high-quality bearings. These bearings are known for their durability, high rotating speed, and resistance to abrasion and heat, ensuring reliable and smooth operation.
5. What are the advantages of the China Custom Trailer Truck Axle?
The China Custom Trailer Truck Axle offers several advantages, including a high load capacity, precise construction, and reliability on the road. It is designed to withstand heavy loads and provide long-lasting performance, making it an excellent choice for your trailer.
Other Products and Services
In addition to our China Custom Trailer Truck Axle, we also offer a wide range of other industrial products. Our product lineup includes agricultural gearboxes, power output shafts, sprockets, hydraulic couplings, worm gear reducers, racks, roller chains, pulleys, planetary gearboxes, timing pulleys, bushings, and more. We take pride in providing high-quality products at competitive prices, backed by exceptional customer service.
With our expertise and advanced manufacturing capabilities, we can accommodate custom orders based on your drawings and samples. We strive to meet our customers’ specific requirements and ensure their satisfaction.
Performance Characteristics of Axle
Axles are crucial components in various vehicles and machinery, providing support and allowing rotational movement. The performance characteristics of axles include load-bearing capacity, durability, and wear resistance. Axles should be able to bear the weight of the vehicle or machinery and maintain stability during operation. Durability is essential as axles are subjected to constant stress and pressure, and wear resistance is necessary to prevent damage and prolong the lifespan of axles.
Types and Characteristics of Axle
There are several types of axles, including straight, drop, and stub axles. Straight axles are the simplest type, consisting of a single shaft connecting the wheels. Drop axles are designed for larger vehicles and feature a drop in the center to lower the ride height. Stub axles are used in trailers and have a pivot point that allows the wheels to turn. The characteristics of axles vary depending on the type and application, but they all share the ability to support and rotate wheels.
Advantages of Axle Made of Different Materials
Axles can be made of various materials, including steel, aluminum, and titanium. Steel axles are durable and strong, making them ideal for heavy-duty applications. Aluminum axles are lightweight and corrosion-resistant, making them suitable for high-performance applications. Titanium axles are strong, lightweight, and corrosion-resistant, making them ideal for racing and other high-performance applications. The choice of material depends on the intended application and performance requirements.
Application of Axle in Various Fields
Axles are essential components in various fields, including the automotive industry, heavy machinery, trailers, railway systems, bicycles, and more. In the automotive industry, axles are used in cars, trucks, and other vehicles to support and rotate the wheels. Heavy machinery such as excavators, bulldozers, and cranes also use axles to provide support and movement. Trailers and railway systems require axles to support and move cargo and passengers. Bicycles use axles to support and rotate the wheels, providing the rider with propulsion and stability.
Future Development Trends and Opportunities of Axle Products
The future development of axle products is focused on improving performance and reducing weight. Lightweight materials such as carbon fiber and composites are being used to reduce the weight of axles while maintaining strength and durability. Advancements in technology, such as 3D printing, are also being used to create complex geometries and designs that improve performance and reduce weight. The increasing demand for electric and autonomous vehicles is also creating opportunities for new axle designs and applications.
Choosing a Suitable Axle
The choice of a suitable axle depends on several factors, including load capacity, material, type of axle, dimensions and specifications, braking system compatibility, and application type. The load capacity should be sufficient to support the weight of the vehicle or machinery. The material should be chosen based on the intended application and performance requirements. The type of axle should be selected based on the vehicle or machinery design. The dimensions and specifications should be compatible with the vehicle or machinery. The braking system compatibility should be considered to ensure proper operation. The application type should be evaluated to determine the appropriate axle design and performance characteristics.
Conclusion
In conclusion, axles are crucial components in various vehicles and machinery, providing support and allowing rotational movement. The performance characteristics of axles include load-bearing capacity, durability, and wear resistance. The choice of material depends on the intended application and performance requirements. Axles are used in various fields, including the automotive industry, heavy machinery, trailers, railway systems, bicycles, and more. The future development of axle products is focused on improving performance and reducing weight, creating opportunities for new designs and applications.
Author: Dream
All the content of the page is from the Internet, the content is only as a reference for product selection, our products are replacement parts and not original spare parts; we are not the holder of the original trademarks of the content, our products are only suitable for after-sales replacement parts and not original spare parts, our replacement parts can be perfectly adapted to the original spare parts; if you need to buy original spare parts, please contact the original factory to buy. If you want to buy original spare parts, please contact the original supplier for purchase.