Product Description

13/16T Truck Semi Trailer Parts Germany/ America Type Drum Trailer Axle with Drum brake

Product Description

Semi-trailer axle refers to the axle assembly specially used on semi-trailer. It is a key part of the vehicle chassis. It usually includes auxiliary accessories such as axle, brake and suspension. It is connected to the trailer body through the suspension. Wheels are installed at both ends of the axle. , its main function is to carry the load of the trailer and maintain the normal driving of the vehicle.

Our lightweight axles are mainly used for powder tank semi-trailers, van semi-trailers, flatbed semi-trailers, container skeleton semi-trailers, oil tank semi-trailers, etc.

The semi-trailer axle is connected by the suspension and the frame, which plays a load-bearing role for the Xihu (West Lake) Dis. trailer. Therefore, before the vehicle runs, check whether the connecting bolts of the external structure of the axle are loose, whether the axle has oil leakage, whether the rim and reducer assembly are Not abnormal noise, etc., to ensure safety.

Semi-trailer axle maintenance:

1. On-time maintenance is performed every 10,000km after the initial maintenance.

2. The contents of regular maintenance include: replacing the lubricating oil, tightening the fasteners, checking the toe-in, checking the wear degree of the brake pads, and if the wear level is reached, it should be replaced in time and the brake gap should be adjusted, and the deceleration should be checked. Whether the gap between the main gear and the driven gear is too large, and whether the gear oil exceeds the function of use, if there is a similar situation, the gap should be adjusted and the grease should be replaced in time.

Product Parameters

Axle model:	F2571AD	F2402	F2404	F2462BII	FN20DB01AA-200
Axle type:	trailer axle	trailer axle	trailer axle	trailer axle	trailer axle
Rated axle load:	16000kg	13000kg	13000kg	16000kg	12000kg
Curb-weight:	398kg	365kg	351kg	425kg
Front Wheelbase /rear Wheelbase:	1850mm	1840mm	1840mm	1850mm	1816mm
Brakes:	S cam brake	S cam brake	S cam brake	S cam brake	Disc brakes
Brake size:	Φ420X180	Φ420X180	Φ420X180	Φ420X220	Φ430X45
Wheel Bolts:					10xM22x1.5 ISOmm
Rims:	8.0V-20 inch	7.5-20inch	7.5V-20inch	8.0V-20inch	R22.5inch
Remark:	Internal brake drum	External brake drum	External brake drum	Internal brake drum	Twin tires; disc brakes

 

Detailed Photos

Applications

The axles are mainly used on semi-trailer. It is a key component of the vehicle chassis. It usually includes auxiliary accessories such as axle, brake and suspension. It is connected to the trailer body through the suspension. The main function of the wheel is to carry the load of the trailer and maintain the normal driving of the vehicle.

The axle is directly related to the load-bearing, braking and driving of the semi-trailer. In order to fully guarantee the semi-trailer’s attendance, safety performance and economic benefits during long-distance travel, it is very important to choose a high-quality axle. Especially in some places, there are many mountain roads for long-distance transportation, the terrain is rugged, long and curved slopes are common, and the driving conditions of vehicles are severe, which puts forward higher requirements for the quality and performance of trailer axles.

Company Introduction

Packaging & Shipping

FAQ

Q. What is your terms of packing?

A: Generally, goods are sealed in ploy bags and packed in cartons and pallet or wood cases.

 

Q. What is your terms of payment?

A: T/T (deposit + balance before delivery). The photos of the products and packages can be showed before the balance done.

 

Q. What is your terms of delivery?

A: EXW, FOB, CFR, CIF.  By CZPT shipping or by air or by express, or by land.

 

Q. How about your delivery time?

A: Generally, it will take 10-30 days after the advance payment done.
The exact delivery time depends on the parts items and the quantity of your order.

 

Q. Can you produce according to the samples?

A: Yeah, we can produce by your samples and with detailed technical drawings for better. 

 

Q. What is your sample policy?

A: The sample for free charge if we have ready parts in stock, but the customs tax and courier cost shall be done by buyer party.

 

Q. How do you make our business long-term and good relationship?

A: We provide our clients with one-stop service, from specific component to final assembled products, solving various problem for different clients all over the world.

Screws and Screw Shafts

A screw is a mechanical device that holds objects together. Screws are usually forged or machined. They are also used in screw jacks and press-fitted vises. Their self-locking properties make them a popular choice in many different industries. Here are some of the benefits of screws and how they work. Also read about their self-locking properties. The following information will help you choose the right screw for your application.

Machined screw shaft

A machined screw shaft can be made of various materials, depending on the application. Screw shafts can be made from stainless steel, brass, bronze, titanium, or iron. Most manufacturers use high-precision CNC machines or lathes to manufacture these products. These products come in many sizes and shapes, and they have varying applications. Different materials are used for different sizes and shapes. Here are some examples of what you can use these screws for:
Screws are widely used in many applications. One of the most common uses is in holding objects together. This type of fastener is used in screw jacks, vises, and screw presses. The thread pitch of a screw can vary. Generally, a smaller pitch results in greater mechanical advantage. Hence, a machined screw shaft should be sized appropriately. This ensures that your product will last for a long time.
A machined screw shaft should be compatible with various threading systems. In general, the ASME system is used for threaded parts. The threaded hole occupies most of the shaft. The thread of the bolt occupy either part of the shaft, or the entire one. There are also alternatives to bolts, including riveting, rolling pins, and pinned shafts. These alternatives are not widely used today, but they are useful for certain niche applications.
If you are using a ball screw, you can choose to anneal the screw shaft. To anneal the screw shaft, use a water-soaked rag as a heat barrier. You can choose from 2 different options, depending on your application. One option is to cover the screw shaft with a dust-proof enclosure. Alternatively, you can install a protective heat barrier over the screw shaft. You can also choose to cover the screw shaft with a dust-proof machine.
If you need a smaller size, you can choose a smaller screw. It may be smaller than a quarter of an inch, but it may still be compatible with another part. The smaller ones, however, will often have a corresponding mating part. These parts are typically denominated by their ANSI numerical size designation, which does not indicate threads-per-inch. There is an industry standard for screw sizes that is a little easier to understand.

Ball screw nut

When choosing a Ball screw nut for a screw shaft, it is important to consider the critical speed of the machine. This value excites the natural frequency of a screw and determines how fast it can be turned. In other words, it varies with the screw diameter and unsupported length. It also depends on the screw shaft’s diameter and end fixity. Depending on the application, the nut can be run at a maximum speed of about 80% of its theoretical critical speed.
The inner return of a ball nut is a cross-over deflector that forces the balls to climb over the crest of the screw. In 1 revolution of the screw, a ball will cross over the nut crest to return to the screw. Similarly, the outer circuit is a circular shape. Both flanges have 1 contact point on the ball shaft, and the nut is connected to the screw shaft by a screw.
The accuracy of ball screws depends on several factors, including the manufacturing precision of the ball grooves, the compactness of the assembly, and the set-up precision of the nut. Depending on the application, the lead accuracy of a ball screw nut may vary significantly. To improve lead accuracy, preloading, and lubrication are important. Ewellix ball screw assembly specialists can help you determine the best option for your application.
A ball screw nut should be preloaded prior to installation in order to achieve the expected service life. The smallest amount of preload required can reduce a ball screw’s calculated life by as much as 90 percent. Using a lubricant of a standard grade is recommended. Some lubricants contain additives. Using grease or oil in place of oil can prolong the life of the screw.
A ball screw nut is a type of threaded nut that is used in a number of different applications. It works similar to a ball bearing in that it contains hardened steel balls that move along a series of inclined races. When choosing a ball screw nut, engineers should consider the following factors: speed, life span, mounting, and lubrication. In addition, there are other considerations, such as the environment in which the screw is used.

Self-locking property of screw shaft

A self-locking screw is 1 that is capable of rotating without the use of a lock washer or bolt. This property is dependent on a number of factors, but 1 of them is the pitch angle of the thread. A screw with a small pitch angle is less likely to self-lock, while a large pitch angle is more likely to spontaneously rotate. The limiting angle of a self-locking thread can be calculated by calculating the torque Mkdw at which the screw is first released.
The pitch angle of the screw’s threads and its coefficient of friction determine the self-locking function of the screw. Other factors that affect its self-locking function include environmental conditions, high or low temperature, and vibration. Self-locking screws are often used in single-line applications and are limited by the size of their pitch. Therefore, the self-locking property of the screw shaft depends on the specific application.
The self-locking feature of a screw is an important factor. If a screw is not in a state of motion, it can be a dangerous or unusable machine. The self-locking property of a screw is critical in many applications, from corkscrews to threaded pipe joints. Screws are also used as power linkages, although their use is rarely necessary for high-power operations. In the archimedes’ screw, for example, the blades of the screw rotate around an axis. A screw conveyor uses a rotating helical chamber to move materials. A micrometer uses a precision-calibrated screw to measure length.
Self-locking screws are commonly used in lead screw technology. Their pitch and coefficient of friction are important factors in determining the self-locking property of screws. This property is advantageous in many applications because it eliminates the need for a costly brake. Its self-locking property means that the screw will be secure without requiring a special kind of force or torque. There are many other factors that contribute to the self-locking property of a screw, but this is the most common factor.
Screws with right-hand threads have threads that angle up to the right. The opposite is true for left-hand screws. While turning a screw counter-clockwise will loosen it, a right-handed person will use a right-handed thumb-up to turn it. Similarly, a left-handed person will use their thumb to turn a screw counter-clockwise. And vice versa.

Materials used to manufacture screw shaft

Many materials are commonly used to manufacture screw shafts. The most common are steel, stainless steel, brass, bronze, and titanium. These materials have advantages and disadvantages that make them good candidates for screw production. Some screw types are also made of copper to fight corrosion and ensure durability over time. Other materials include nylon, Teflon, and aluminum. Brass screws are lightweight and have aesthetic appeal. The choice of material for a screw shaft depends on the use it will be made for.
Shafts are typically produced using 3 steps. Screws are manufactured from large coils, wire, or round bar stock. After these are produced, the blanks are cut to the appropriate length and cold headed. This cold working process pressudes features into the screw head. More complicated screw shapes may require 2 heading processes to achieve the desired shape. The process is very precise and accurate, so it is an ideal choice for screw manufacturing.
The type of material used to manufacture a screw shaft is crucial for the function it will serve. The type of material chosen will depend on where the screw is being used. If the screw is for an indoor project, you can opt for a cheaper, low-tech screw. But if the screw is for an outdoor project, you’ll need to use a specific type of screw. This is because outdoor screws will be exposed to humidity and temperature changes. Some screws may even be coated with a protective coating to protect them from the elements.
Screws can also be self-threading and self-tapping. The self-threading or self-tapping screw creates a complementary helix within the material. Other screws are made with a thread which cuts into the material it fastens. Other types of screws create a helical groove on softer material to provide compression. The most common uses of a screw include holding 2 components together.
There are many types of bolts available. Some are more expensive than others, but they are generally more resistant to corrosion. They can also be made from stainless steel or aluminum. But they require high-strength materials. If you’re wondering what screws are, consider this article. There are tons of options available for screw shaft manufacturing. You’ll be surprised how versatile they can be! The choice is yours, and you can be confident that you’ll find the screw shaft that will best fit your application.